AR-205 (serv.man11). AR205 Service Manual-User Program - Sharp Copying Equipment Service Manual (repair manual). Page 4

For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.

Program name

Parameters

Auto clear time

0

OFF

1

30sec

∗

2

60sec

3 90sec

4

120sec

5

10sec

Preheat mode

∗∗

0

OFF

∗∗

1

30sec

2

60sec

∗

 3

90sec

4

120sec

Auto power shut-off timer

∗

 1

30min

2

60min

3

90min

4

120min

5

240min

Stream feeding mode

∗

 0

OFF

1

ON

Auto power shut-off setting

0

OFF

∗

 

1

ON

Border line for 2 in 1 or 4 in 1

∗

 0

OFF

1

ON

Rotation copy

0

OFF

∗

 

1

ON

Auto paper select mode

0

OFF

∗

 

1

ON

Auto tray switching

0

OFF

∗

 

1

ON

Erase width adjustment

0

0mm (0")

1

5mm (1/4")

∗

 2

10mm (1/2")

3

15mm (3/4")

4

20mm (1")

Layout in 2 in 1 copy

∗

 1

Pattern 1

2

Pattern 2

Layout in 4 in 1 copy

∗

 1

Pattern 1

2

Pattern 2

3

Pattern 3

4

Pattern 4

Offset of paper output tray

0

Upper OFF,

lower OFF

∗

  1

Upper ON,

lower ON

2

Upper ON,

lower OFF

3

Upper OFF,

lower ON

Image rotation in duplex copying

∗

0

OFF

1

ON

Location of the margin

∗

1

Left

2

Top

Factory default settings are indicated with an asterisk (

∗

).

∗∗

In European countries, the default setting of the preheat mode is 1
(30 sec.). For other programs, factory-default settings in these
countries are same to those shown above with an asterisk (

∗

).

Note: If you select "0" (OFF) in a program, the corresponding function

will be disabled.

5) Press the START key.

●

The right-hand number in the copy quantity display will be
steadily lit and the entered value will be stored.

6) To continue with other user programs, press the © key and then

repeat steps 2 to 5. To exit the user program mode, press the light
(   )  key.

●

All the alarm indicators will go out.

Settings for auditing accounts

If the auditing mode is enabled, copying is limited to operators with an
assigned 3-digit account number. A maximum of 20, 3-digit account
numbers can be assigned. Use program No. 11 to register account
numbers.
When program No. 10 is entered, the current setting (0: OFF, 1:ON)
will blink on the right side of the copy quantity display.

1) Select the desired setting using the numeric keys.

0: OFF
1: ON

2) Press the START key.

●

The setting will be stored.

3) To continue with other user programs, press the © key and enter

another program number. To exit the user program mode, press
the  light  (   )  key.

Program No. 11 is used to register accounts. When program No. 11 is
entered,

1) Enter a 3-digit account number using the numeric keys.

●

Any 3-digit number except "000" can be registered as an ac-
count number.

2) Press the START key.

●

If a number that is already registered or "000" is entered, the
number will blink in the copy quantity display.

3) Repeat steps 1 and 2 for other account numbers.
4) To continue with other user programs, press the © key and enter

another program number. To exit the user program mode, press
the  light  (   )  key.

Program No. 12 is used to change account numbers. When program
No. 12 is entered, an account number will appear in the copy quantity
display.

●

If no account number has been registered, "12E" will appear in
the copy quantity display. Press the © key. The system will
return to step 2 on page 39.

1) Use the copy ratio display (   ) key to select the account number

to be changed.

●

Use the    key to advance through the account numbers.

2) Press the START key.

●

The account number will be erased and "- - -" will blink in the
copy quantity display.

3) Enter a new account number using the numeric keys.
4) Press the START key.

●

If a number that is already registered or "000" is entered, the
number will blink in the copy quantity display.

5) Repeat steps 1 to 4 for other account numbers.
6) To continue with other user programs, press the © key and enter

another program number. To exit the user program mode, press
the  light  (   )  key.

●

If no account number has been registered, "13E" will appear in
the copy quantity display. Press the © key. The system will
return to step 2 on page 39.

1) To delete an individual account, press the 0 key.

To delete all accounts, press key 1.

2) Press the START key.

AR-205

8 – 2