Read Sharp AR-203 (serv.man5) Service Manual online
AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 35
66
05
Signal send mode (Soft SW
set value) (Executable only
when the FAX is installed.)
set value) (Executable only
when the FAX is installed.)
[Function]
Use to set the signal send mode (Soft SW set value).
Use to set the signal send mode (Soft SW set value).
Facsimile simulation design specifications.
[Operation]
07
Image memory content print
(Executable only when the
FAX is installed.)
(Executable only when the
FAX is installed.)
[Function]
Use to print the image memory content.
Use to print the image memory content.
[Operation]
10
Image memory content clear
(Executable only when the
FAX is installed.)
(Executable only when the
FAX is installed.)
[Function]
Use to clear the image memory content.
Use to clear the image memory content.
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
1
NO SIGNAL
13
7200bps(V34)
25
2400bps(V27ter)
2
33600bps(V34)
14
4800bps(V34)
26
300bps(FLAG)
3
31200bps(V34)
15
2400bps(V34)
27
2100Hz(CED)
4
28800bps(V34)
16
14400bps(V33)
28
1100Hz(CNG)
5
26400bps(V34)
17
12000bps(V33)
29
300bps(V21)
6
24000bps(V34)
18
14400bps(V17)
30
2100Hz(ANSam)
7
21600bps(V34)
19
12000bps(V17)
31
DUMMY RING
8
19200bps(V34)
20
9600bps(V17)
32
NO VOICE ANSWER
9
16800bps(V34)
21
7200bps(V17)
33
NO RING BACK TONE
10
14400bps(V34)
22
9600bps(V29)
34
LINE OFF HOOK
11
12000bps(V34)
23
7200bps(V29)
35
LINE ON HOOK
12
9600bps(V34)
24
4800bps(V27ter)
1) Initial display
2) 2-digit (1-35) with [Numeric] key / [
] [
] key / 2sec after
Pressing [
] key or [
] key reverses the sequence.
∗ [Clear] key: FAX control is terminated.
3) [OK]/[ENTER] key: Send after setting
3) [OK]/[ENTER] key: Send after setting
∗ [Clear] key: Returns to "1) Initial display".
SELECT OUTPUT SIGNAL
(2 DIGITS) No.___
No. (1-35)
1:NO SIGNAL
.....
No. (1-35)
35:LINE ON HOOK
OUTPUTING SIGNAL SSW
PRESS CLEAR TO STOP
• When print is allowed
After completion of printing,
FAX control is terminated.
FAX control is terminated.
• When there is no print data
After 2 sec, FAX control is
terminated.
terminated.
• When print is inhibited
After 2 sec, FAX control is
terminated.
terminated.
PRINT STORED
NO DATA
CAN NOT PRINT
• When there are some print data
After completion of memory clear, the buzzer
sounds.
sounds.
Remains unchanged until the power is turned
off.
off.
• When there are no print data
After completion of memory clear
After 2sec, FAX control is terminated.
CLEAR IMAGE MEMORY
CLEARED
PLEASE POWER OFF
CLEAR IMAGE MEMORY
CLEARED
Click on the first or last page to see other AR-203 (serv.man5) service manuals if exist.