AR-200 (serv.man166). Version 4.10 Firmware (Sent out as Fast Fact 89). - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-200 (serv.man166) technical bulletin
Model
AR-200 (serv.man166)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
10.36 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Version 4.10 Firmware (Sent out as Fast Fact 89).
File
ar-200-sm166.pdf
Date
Next: Sharp AR-200 (serv.man167) Technical Bulletin

Read Sharp AR-200 (serv.man166) Technical Bulletin online

“FAST FACTS”
FOR THE ATTENTION OF THE SERVICE DEPARTMENT
Models :AR161/AR200     Ref : FF/COP/89
Date :18
TH
 June 99
   
Subject :Software Upgrade Version 4.10
Details:
1)
 
The display will now indicate  ‘CH’  when the side cover of the AR-DE6 (2 Tray unit) is
opened.
2)
 
When a copy job is run on a machine with an AR-EB3 ( Electronic Sort Board ) in group
mode/ sort mode and a single copy job exceeds the upper limit number of copies that the
exit tray can hold ( see table), the copy job will stop when the upper limit of copies is
reached, then the TRAY FULL LED will light and the copy start button will flash.
Job Separator ( AR-TR2 )
Upper limit number of copies
the exit tray can hold
Machine without separator
Job is stopped at 250 copies
Machine with
AR-EB3
Machine with separator
Job is stopped at 150 copies
The above feature will be on when SIM 26-51 is set to “1”. If set to “O” and the exit is
full the machine will show a paper jam as with previous version of firmware.
The firmware can be found on the Sharp Intranet under AR161, AR200 and  latest technica
information.
NOTE :-
Please advise our Technical Administration Department of any changes to your Service Department
details (i.e. fax number, telephone number, address, etc.) on fax number 0161 205 0014.
Sharp Electronics (UK) Ltd
Copier Technical Support
Technical Services Group
Display

Download Sharp AR-200 (serv.man166) Technical Bulletin

Here you can read online and download Sharp AR-200 (serv.man166) Technical Bulletin in PDF. AR-200 (serv.man166) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-200 (serv.man166) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

AR-200 (serv.man166) Service Manuals

Preview DownloadPagesSize
AR-200 (serv.man5) AR200 Service Manual Service Manual 23 153.55 KB
AR-200 (serv.man9) AR200 Operation Manual-Part 1 User Guide / Operation Manual 28 875.36 KB
AR-200 (serv.man10) AR200 Operation Manual-Part 2 User Guide / Operation Manual 10 406.13 KB
AR-200 (serv.man11) AR200 Operation Manual-Part 3 User Guide / Operation Manual 18 216.41 KB
AR-200 (serv.man12) AR200 Operation Manual-Part 4 User Guide / Operation Manual 28 487.6 KB
AR-200 (serv.man6) Information of parts change Parts Guide 2 28.25 KB
AR-200 (serv.man7) Information of parts change To improve productivity, the L pulley has been changed. Parts Guide 2 20.3 KB
AR-200 (serv.man8) AR200 Parts Guide Parts Guide 12 400 KB
AR-200 (serv.man2) Strength increase of the grid mounting area on the MC holder rear side Specification 2 574.94 KB
AR-200 (serv.man3) Disuse of the fusing front transport sheet due to change of the side door inner frame Specification 2 892.31 KB
AR-200 (serv.man4) AR200 Specifications Specification 3 154.91 KB
AR-200 (serv.man20) Manual paper feed roller material change. Technical Bulletin 5 342.3 KB
AR-200 (serv.man21) MODIFICATION OF PAPER FEED ROLLER HOLDER ETC. TO IMPROVE PRODUCTIVITY Technical Bulletin 5 290.28 KB
AR-200 (serv.man22) MATERIAL CHANGE PAPER FEED SHEET Technical Bulletin 4 354.66 KB
AR-200 (serv.man23) Information of parts change (Righthand Door Assembly). Technical Bulletin 1 100.72 KB
AR-200 (serv.man24) Information of parts change (Duplex drive idle plate Copy lamp unit). Technical Bulletin 2 80.54 KB
AR-200 (serv.man25) Strength increase of the fusing lower frame. Technical Bulletin 2 57.91 KB
AR-200 (serv.man26) Strength increase of the boss for mounting the manual paper feeding latch pawl B. Technical Bulletin 3 934.83 KB
AR-200 (serv.man27) Parts Changes. Technical Bulletin 1 21.62 KB
AR-200 (serv.man28) Parts Change. Technical Bulletin 2 30.21 KB
AR-200 (serv.man29) Parts Change, Main Motor. Technical Bulletin 1 21.81 KB
AR-200 (serv.man30) Countermeasure against wrinkles on the copy paper or paper jam due to shrinkage of the FU felt. Technical Bulletin 2 26.84 KB
AR-200 (serv.man31) Attachment of a high temperature Caution Label. Technical Bulletin 2 106.9 KB
AR-200 (serv.man32) Change due to production stoppage of rubber for the manual paper feed roller (repeat due to incorrect information) Technical Bulletin 2 84.65 KB
AR-200 (serv.man33) Change due to production stoppage of rubber for the manual paper feed roller. Technical Bulletin 2 122.55 KB
AR-200 (serv.man34) 1. Change of the MX roller, 2. Material change of the roller arm, 3. Shape change of the delivery upper guide 20, 4. Change of the fusing connecting plate, 5. Standardisation of the parts code for the ATC sensor. Technical Bulletin 5 112.48 KB
AR-200 (serv.man35) 1. Multi frame change, 2. Shape change of the fusing cover. Technical Bulletin 2 16.54 KB
AR-200 (serv.man36) 1. Multi frame change, 2. Shape change of the fusing cover. Technical Bulletin 2 38.6 KB
AR-200 (serv.man37) Countermeasure against wideningof the screw hole of fixing the fuser unit to the intermediate frame. Technical Bulletin 2 483.51 KB
AR-200 (serv.man38) Information of parts change. 1 Fusing front PG change. 2 Cleaning blade change. 3 Roller pawl change. 4 Change of the AC switch to comply with RoHS. 5 Change of the line cable to comply with RoHS. Technical Bulletin 4 308.83 KB
AR-200 (serv.man39) Change of parts for the fusing unit. Technical Bulletin 2 35.61 KB
AR-200 (serv.man40) Replacement procedure for the polygon motor in the LSU unit. Technical Bulletin 4 310.83 KB
AR-200 (serv.man41) Information of parts change. (MF Sensor Spring, Delivery Pulley 34T) Technical Bulletin 2 359.14 KB
AR-200 (serv.man42) 128-Information of parts change. Technical Bulletin 1 9.71 KB
AR-200 (serv.man43) Correction to illustration of optical unit in parts guide. Technical Bulletin 1 80.77 KB
AR-200 (serv.man44) Countermeasure against paper jam when ejecting Technical Bulletin 2 92.81 KB
AR-200 (serv.man45) CHANGE OF PARTS (Base Plate Unit 2 Delivery Frame Unit MCU PWB) Technical Bulletin 1 26.04 KB
AR-200 (serv.man46) Countermeasure against paper jam due to deformation of the fusing upper paper guide sheet. Technical Bulletin 2 47.77 KB
AR-200 (serv.man47) Countermeasure against skewing due to gap in Tray Guide R Technical Bulletin 2 185.54 KB
AR-200 (serv.man48) Information of parts change Technical Bulletin 2 791.3 KB
AR-200 (serv.man49) Part number for Panther-series Power Switch Technical Bulletin 1 11.11 KB
AR-200 (serv.man50) Countermeasure against U2-40 trouble due to power supply noise Technical Bulletin 1 1.08 MB
AR-200 (serv.man51) New supply of EEPROM for service Technical Bulletin 1 7.2 KB
AR-200 (serv.man52) Change to shape of rear plate to prevent dislocation Technical Bulletin 1 183.13 KB
AR-200 (serv.man53) Countermeasure against manual feed paper jams, due to contamination of drive section Technical Bulletin 2 277.55 KB
AR-200 (serv.man54) Improved durability of cam transmission arm in manual paper feed unit Technical Bulletin 1 13 KB
AR-200 (serv.man55) Countermeasure against breakage of the fusing rear paper guide rib Technical Bulletin 1 115.9 KB
AR-200 (serv.man56) Countermeasure against breakage of the discharge holder claw Technical Bulletin 1 93.75 KB
AR-200 (serv.man57) Countermeasure against paper jam when ejecting paper Technical Bulletin 1 70.94 KB
AR-200 (serv.man58) Countermeasure against F1-06 errors Technical Bulletin 1 54.35 KB
AR-200 (serv.man59) Countermeasure against fall of DMC actuator Technical Bulletin 1 14.47 KB
AR-200 (serv.man60) Parts change information for PS transport roller Technical Bulletin 1 13.27 KB
AR-200 (serv.man61) Countermeasure for black stripes when using SPF, and for occurrence of E7-04 error message Technical Bulletin 2 37.56 KB
AR-200 (serv.man62) Countermeasure against skewing when feeding from cassette Technical Bulletin 1 20.88 KB
AR-200 (serv.man63) Design of feeding rollers is changed to improve quality of paper feeding Technical Bulletin 2 52.56 KB
AR-200 (serv.man64) Reprogramming service for ARFX2 facsimile option for panther - series machines Technical Bulletin 1 12.64 KB
AR-200 (serv.man65) Information of parts change (MCU PWB) Technical Bulletin 1 15.65 KB
AR-200 (serv.man66) Information of parts change (document feed) Technical Bulletin 1 13.25 KB
AR-200 (serv.man67) Correction of E7-04 error Technical Bulletin 1 12.56 KB
AR-200 (serv.man68) Parts change information (paper feeding unit process unit side door unit) Technical Bulletin 2 53.53 KB
AR-200 (serv.man69) Countermeasure against right door detection error Technical Bulletin 1 950.17 KB
AR-200 (serv.man70) Parts change information (feeding frame rollers) Technical Bulletin 1 14.07 KB
AR-200 (serv.man71) New supply of a service part (paper feed roller rubber) Technical Bulletin 1 12.43 KB
AR-200 (serv.man72) Countermeasure against abnormal noise from the 2nd transport clutch Technical Bulletin 1 33.05 KB
AR-200 (serv.man73) Version change of the maintenance (firmware download) software Technical Bulletin 1 13.34 KB
AR-200 (serv.man74) Parts change information (MCU PWB) Technical Bulletin 1 12.86 KB
AR-200 (serv.man75) Change of cassette lock claws Technical Bulletin 1 23.34 KB
AR-200 (serv.man76) New supply of service part Technical Bulletin 1 23.99 KB
AR-200 (serv.man77) Reducing white stripes on the CRU unit Technical Bulletin 1 21.38 KB
AR-200 (serv.man78) Parts change information Technical Bulletin 2 530.64 KB
AR-200 (serv.man79) New supply of fusing unit adding a cleaning felt AS Technical Bulletin 1 21.92 KB
AR-200 (serv.man80) Information about the part code of the delivery frame Technical Bulletin 1 21.9 KB
AR-200 (serv.man81) Parts change information Technical Bulletin 2 205.2 KB
AR-200 (serv.man82) New supply of fusing unit adding a cleaning felt AS Technical Bulletin 1 21.58 KB
AR-200 (serv.man83) Parts change (lens unit) Technical Bulletin 1 21.48 KB
AR-200 (serv.man84) New supply of a service parts described in AR161 200 ref 079 Technical Bulletin 1 23.39 KB
AR-200 (serv.man85) Software version upgrade of the main ROM for simplex models (Correction of jam detection error in special conditions) Technical Bulletin 1 22.59 KB
AR-200 (serv.man86) Countermeasure against folding of the corner of copying paper on duplex print Technical Bulletin 1 40.57 KB
AR-200 (serv.man87) Countermeasure against oblique feed of the cassette Technical Bulletin 1 33.04 KB
AR-200 (serv.man88) Countermeasure against soiling of upper heat roller. Technical Bulletin 2 111.83 KB
AR-200 (serv.man89) Parts change. Technical Bulletin 3 117.2 KB
AR-200 (serv.man90) Support of double feed during cassette paper feed and document double feed. Technical Bulletin 4 204 KB
AR-200 (serv.man91) Countermeasure against L4-01 (main motor lock) and paper jam. Technical Bulletin 2 345.83 KB
AR-200 (serv.man92) Change of the tonor motor.(Toner not supplied) Technical Bulletin 1 64.45 KB
AR-200 (serv.man93) Countermeasure against job separator home position detection error. Technical Bulletin 2 99.39 KB
AR-200 (serv.man94) Improvement of the manual paper feeding tray lock. Technical Bulletin 1 101.77 KB
AR-200 (serv.man95) Application of grease to the paper feed cassette rail. Technical Bulletin 1 100.39 KB
AR-200 (serv.man96) Countermeasure against breakage of the 2nd joint gear teeth. (WHITE) Technical Bulletin 2 87.92 KB
AR-200 (serv.man97) Parts change for the productivity improvement. (WHITE) Technical Bulletin 2 84.18 KB
AR-200 (serv.man98) Caution when replacing the MCU. (WHITE) Technical Bulletin 1 60.59 KB
AR-200 (serv.man99) Version upgrade of main body software. (Update of ref.068)(WHITE) Technical Bulletin 1 63.35 KB
AR-200 (serv.man100) Change of the operation instruction label. (WHITE) Technical Bulletin 2 102.41 KB
AR-200 (serv.man101) Version upgrade of the main body software. (WHITE) Technical Bulletin 1 36.58 KB
AR-200 (serv.man102) Change of the operation instruction label. (WHITE) Technical Bulletin 2 72.22 KB
AR-200 (serv.man103) Change of the shifter gear (50T). (WHITE) Technical Bulletin 2 62.9 KB
AR-200 (serv.man104) Change of the LSU unit. (WHITE) Technical Bulletin 1 36.42 KB
AR-200 (serv.man105) Parts change of the fusing unit. (WHITE) Technical Bulletin 1 49.79 KB
AR-200 (serv.man106) Supply of the paper feed roller as a service part. (WHITE) Technical Bulletin 1 126.6 KB
AR-200 (serv.man107) Material change of the fusing gear (45T). (WHITE) Technical Bulletin 1 128.41 KB
AR-200 (serv.man108) Version upgrade of the software of the main body. (WHITE) Technical Bulletin 1 102.46 KB
AR-200 (serv.man109) Parts change. (WHITE) Technical Bulletin 19 714.79 KB
AR-200 (serv.man110) Developer Unit Improvement To Correct Clearance Between MX Roller Shaft And Shaft Bearing. (WHITE) Technical Bulletin 2 89.23 KB
AR-200 (serv.man111) Change Of The Photoconductor. (WHITE) Technical Bulletin 1 61.61 KB
AR-200 (serv.man112) Fax Kit Problems. (WHITE) Technical Bulletin 2 68.58 KB
AR-200 (serv.man113) 1.Change Of The LSU Unit. 2.Change Of The Lamp Base Plate. 3.Change Of The LCD Spacer. (WHITE) Technical Bulletin 2 69.68 KB
AR-200 (serv.man114) 1.Earth Wire Treatment Of The 2nd Cassette Interface Harness. 2.Setting Change Of The Default Value Of The Preheat Transition Time Of AR200 For Europe. 3.Information About The Rear Exterior Mounting Procedure. 4.Default Setting Change Of SIM26-51 Copy Stop Setting . (WHITE) Technical Bulletin 3 140.35 KB
AR-200 (serv.man115) Satisfaction Of Energy Star. (WHITE) Technical Bulletin 2 70.51 KB
AR-200 (serv.man116) 1.Version Upgrade Of The CDROM. 2.Version Upgrade Of The PCL Firmware. 3.Release Of The Fax Program. 4.Parts Change For Better Productivity. 5.Supply Of Expanded Memory For The PCL PWB. (WHITE) Technical Bulletin 3 74.48 KB
AR-200 (serv.man117) Noisy Laser Unit. (WHITE) Technical Bulletin 1 58.08 KB
AR-200 (serv.man118) Correction To The Parts Guide. (WHITE) Technical Bulletin 2 79.58 KB
AR-200 (serv.man119) (Revision to reference 041)1.Change Of The Fusing Lower Frame. 2.Change Of The SPF Rack Cover. 3.Countermeasure Against Poor Insertion Of The Motherboard Connector. 4.Change Of The Rubber Cushion. (WHITE) Technical Bulletin 3 85.32 KB
AR-200 (serv.man120) Change Of The DV Side Sheet. (WHITE) Technical Bulletin 1 75.23 KB
AR-200 (serv.man121) Change Of The Default Values. (WHITE) Technical Bulletin 1 66.6 KB
AR-200 (serv.man122) 1.Addition Of Installation Procedure Manual And Protection Sheet. 2.Addition Of Maintenance Card. (WHITE) Technical Bulletin 2 65.93 KB
AR-200 (serv.man123) Satisfaction Of Energy Star. (WHITE) Technical Bulletin 2 70.73 KB
AR-200 (serv.man124) 1.Change Of The PSF Glass Sheet R. 2.Dimensions Change Of The PS Transport Roller. 3.Material Change Of The Copy Operation PWB. (WHITE) Technical Bulletin 3 92.52 KB
AR-200 (serv.man125) 1.Shape Change Of The OP PWB Shield And Addition Of A Shield Plate Card. 2.Shape Change Of The Copy Lamp Unit. 3.Disuse Of the Sub Blade Earth Plate. (WHITE) Technical Bulletin 2 67.58 KB
AR-200 (serv.man126) Version Upgrade Of The Main Body Software. (WHITE) Technical Bulletin 1 61.43 KB
AR-200 (serv.man127) Parts Change For Better Productivity. (WHITE) Technical Bulletin 2 68.56 KB
AR-200 (serv.man128) 1.Change Of The Fusing Lower Frame. 2.Change Of the PSF Rack Cover. 3.Countermeasure Against Poor Insertion Of The Motherboard Connector. 4.Change Of The Rubber Cushion. (WHITE) Technical Bulletin 3 85.19 KB
AR-200 (serv.man129) Correction To The Parts Guide. (WHITE) Technical Bulletin 1 123.76 KB
AR-200 (serv.man130) 1.Countermeasure Against Abnormal Noise. 2.Countermeasure Against Shifter Operation. 3.Shape Change Of The Cooling Fan Duct. (WHITE) Technical Bulletin 3 79.41 KB
AR-200 (serv.man131) 1.Change Of The Operation Panel Exterior. 2.Screw Change. (WHITE) Technical Bulletin 2 70.13 KB
AR-200 (serv.man132) Software Version Upgrade Of The Main Body. (WHITE) Technical Bulletin 1 61.73 KB
AR-200 (serv.man133) Parts Change For Better Productivity. (WHITE) Technical Bulletin 2 71.48 KB
AR-200 (serv.man134) 1.Change Of The Discharge Holder. 2.Shape Change Of The Copy Key. 3.Addition Of The Harness Protection Sheet. (WHITE) Technical Bulletin 2 85.08 KB
AR-200 (serv.man135) Parts Change For Better Productivity. (WHITE) Technical Bulletin 2 70.17 KB
AR-200 (serv.man136) Addition To The Service Manual. (WHITE) Technical Bulletin 1 65.17 KB
AR-200 (serv.man137) Correction To The Parts Guide. (WHITE) Technical Bulletin 1 65.82 KB
AR-200 (serv.man138) 1.Shape Change Of Fusing Cover. 2.Countermeasure Against Abnormal Noise. (WHITE) Technical Bulletin 2 79.7 KB
AR-200 (serv.man139) 1.Change Of Harness Treating Method. 2.Shape Change Of Separator Lever F. (WHITE) Technical Bulletin 2 114.22 KB
AR-200 (serv.man140) Parts Change For Better Productivity. (WHITE) Technical Bulletin 2 81.99 KB
AR-200 (serv.man141) 1.Shape Change Of Rear Exterior. 2.Shape Change Of MCU Fixing Plate. 3.Shape Change Of Sensor Fixing Plate And Optical Base Plate. (WHITE) Technical Bulletin 2 71.73 KB
AR-200 (serv.man142) 1.Change Of 3-Terminal Regulator. 2.Change Of Corner Frame R Re-inforce Plate. 3.Shape Change Of Delivery Tray. (WHITE) Technical Bulletin 2 70.9 KB
AR-200 (serv.man143) Corrections To The Service Manual. (WHITE) Technical Bulletin 2 280.47 KB
AR-200 (serv.man144) 1.Change Of Delivery Earth Spring A. 2.Disuse Of Fusing Front PG Adjusting Shaft. 3.Shape Change Of Base Plate Rail R. (WHITE) Technical Bulletin 2 71.6 KB
AR-200 (serv.man145) 1.Shape Change Of DMC Actuator. 2.Change Of Fron Cabinet. 3.Disuse Of Screws. (WHITE) Technical Bulletin 4 557.37 KB
AR-200 (serv.man146) New Supply Of Process Sub-unit. (WHITE) Technical Bulletin 2 65.11 KB
AR-200 (serv.man147) Countermeasure For Envelopes Postcards Feeding Failure Problem. (WHITE) Technical Bulletin 2 79.75 KB
AR-200 (serv.man148) Shape Change Of Pipe Shutter. (WHITE) Technical Bulletin 1 36.68 KB
AR-200 (serv.man149) Correction To The Parts Guide. (WHITE) Technical Bulletin 1 76.03 KB
AR-200 (serv.man150) Countermeasure Against Jam By Catching Thin Paper In The Drum. (WHITE) Technical Bulletin 2 61.84 KB
AR-200 (serv.man151) Countermeasure Against The Improper Movement Of ARTR2 (Job Separator). (WHITE) Technical Bulletin 2 95.25 KB
AR-200 (serv.man152) 1.Change Of TC BC Interface Electrode Spring. 2.Change Of MCU PWB Parts. 3.Change Of Mirror Motor. (WHITE) Technical Bulletin 2 27.21 KB
AR-200 (serv.man153) 1.Correspondence To EMI. 2.Change Of PS Roller Shaft. 3.Shape Change Of DMC Actuator. 4.Addition Of Front Cover Label. (WHITE) Technical Bulletin 1 25.54 KB
AR-200 (serv.man154) Change Of Reverse Gate. (WHITE) Technical Bulletin 1 23.5 KB
AR-200 (serv.man155) 1.Prevention Against Vibration Of Job Separator. 2.Shape Change Of Separator Lever R. 3.Shape Change Of Full Detection Lever. (WHITE) Technical Bulletin 1 26.12 KB
AR-200 (serv.man156) 1.Countermeasure Against Vertical Stripes. 2.Dry Heater Change. 3.Prevention Against Disengagement Of Bearing Due To Deformation Of Delivery Earth Plate. 4.Countermeasure Against White Stripes In The Halftone Mode. 5.Change Of LED On The Operation PWB. (WHITE) Technical Bulletin 2 41.14 KB
AR-200 (serv.man157) F5-02 Change Of Connector To That With Slider. (WHITE) Technical Bulletin 1 22.94 KB
AR-200 (serv.man158) Parts Guide Correction. (WHITE) Technical Bulletin 1 23.02 KB
AR-200 (serv.man159) Supply Of Service Unit For The Process Unit. (WHITE) Technical Bulletin 2 57.81 KB
AR-200 (serv.man160) Correction Of Flash ROM Version Update (Issue Of No.2.03). (WHITE) Technical Bulletin 3 470.4 KB
AR-200 (serv.man161) Update Of The Software Version Due To Release Of The Option Electronic Sort Board. (WHITE) Technical Bulletin 3 473.83 KB
AR-200 (serv.man162) Update Of The Software Version Due To Release Of The Option Printer Board. (WHITE) Technical Bulletin 3 688.27 KB
AR-200 (serv.man163) Supply Of Individual Parts Of Copy Lamp Unit. (WHITE) Technical Bulletin 2 61.58 KB
AR-200 (serv.man164) Correction Of Flash ROM Version Upgrade. (WHITE) Technical Bulletin 3 684.88 KB
AR-200 (serv.man165) Correction To The Parts Guide. (WHITE) Technical Bulletin 1 18.52 KB
AR-200 (serv.man167) Flash Upgrade Procedure (Sent out as Fast Facts 085) Technical Bulletin 3 325.04 KB
AR-200 (serv.man171) Countermeasure against peeling of the fusing front PG sheet Technical Bulletin 43.55 KB
AR-200 (serv.man16) AR161 200 Firmware (version 5.32) Driver / Update 240.77 KB
AR-200 (serv.man17) AR161 200 DM2000-Firmware for coin vendor Ver7.05 Driver / Update 243.42 KB
AR-200 (serv.man18) AR161 200 Firmware (version 5.29) Driver / Update 236.8 KB
AR-200 (serv.man19) AR161 200-Firmware for coin vendor Ver7.02 Driver / Update 238.96 KB
AR-200 December 2002 Handy Guide 35 1.83 MB
AR-200 (serv.man13) Panther firmware history table (FEB-04), including details of AR-PB8 firmware. FAQ 5 77.93 KB
AR-200 (serv.man14) Details of Fast Facts 100 Damage to ARSP2 ARRP1 FAQ 1 100.4 KB
AR-200 (serv.man15) AR-161,200,205 Caution in connecting AR-SP2 FAQ 1 2.75 KB
AR-200 (serv.man168) MSDS F-00841 Regulatory Data 2 12.59 KB
AR-200 (serv.man169) MSDS F-30841 Regulatory Data 2 11.41 KB
AR-200 (serv.man170) Environmental Data Sheet Regulatory Data 1 8.71 KB

Random: