Read Sharp AR-200 (serv.man11) User Guide / Operation Manual online
39
GENERAL
INFORMA
TION
USER PROGRAMS
4
Select the desired parameter using the numeric keys.
●
The entered parameter number will blink on the right side of the copy
quantity display.
quantity display.
●
The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
60 min., press key 2.
5
Press the START key.
●
The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
and the entered value will be stored.
6
To continue with other user programs, press the
key
and then repeat steps 2 to 5. To exit the user program
mode, press the light (
mode, press the light (
) key.
●
All the alarm indicators will go out.
User programs
Program name
Parameters
Auto clear time
0 e OFF
1 e 30 sec.
* 2 e 60 sec.
3 e 90 sec.
4 e 120 sec.
5 e 10 sec.
Preheat mode
0 e OFF
1 e 30 sec.
2 e 60 sec.
* 3 e 90 sec.
4 e 120 sec.
Auto power shut-off timer
* 1 e 30 min.
2 e 60 min.
3 e 90 min.
4 e 120 min.
5 e 240 min.
Stream feeding mode
* 0 e OFF
1 e ON
Auto power shut-off setting
0 e OFF
* 1 e ON
Border line for 2 in 1 or 4 in 1 * 0 e OFF
1 e ON
Rotation copy
0 e OFF
* 1 e ON
Auto paper select mode
0 e OFF
* 1 e ON
Auto tray switching
0 e OFF
* 1 e ON
Erase width adjustment
0 e 0 mm
1 e 5 mm
* 2 e 10 mm
3 e 15 mm
4 e 20 mm
Layout in 2 in 1 copy
* 1 e Pattern 1
2 e Pattern 2
Layout in 4 in 1 copy
* 1 e Pattern 1
2 e Pattern 2
3 e Pattern 3
4 e Pattern 4
Offset of paper output tray
0 e Upper OFF, lower OFF
* 1e Upper ON, lower ON
2 e Upper ON, lower OFF
3 e Upper OFF, lower ON
Factory default settings are indicated with an asterisk (*). For layout in 2 in 1 copy and 4 in 1 copy, see page 63.
If you select “0” (OFF) in a program, the corresponding
function will be disabled.
function will be disabled.
Click on the first or last page to see other AR-200 (serv.man11) service manuals if exist.