Read Sharp AR-200 (serv.man11) User Guide / Operation Manual online
47
GENERAL
INFORMA
TION
Problem
Solution
●
Copier plugged in?
●
Power switch ON?
●
Copy density properly adjusted?
●
Is the original placed face down?
●
Paper too heavy?
●
Paper damp?
●
Is transfer charger clean?
●
Non-standard paper used?
●
Paper properly installed?
●
Pieces of paper inside copier?
●
Paper curled or damp?
●
Has the platen cover been
completely opened when the
original is placed on the original
table?
completely opened when the
original is placed on the original
table?
●
Does the original include large
black solid area?
black solid area?
Plug the copier into a grounded outlet.
See page 8.
See page 8.
Turn the power switch ON.
See page 14.
See page 14.
See pages 14 and 26.
Place the original face down on the original
table.
table.
Use copy paper within the specified range.
See page 50.
See page 50.
Replace with dry copy paper.
Be sure to store copy paper in a dry location.
See page 51.
Be sure to store copy paper in a dry location.
See page 51.
Clean the transfer charger.
See page 71.
See page 71.
Use standard paper. If using special paper,
feed the paper through the bypass tray.
See pages 18 and 50.
feed the paper through the bypass tray.
See pages 18 and 50.
Make sure the paper is properly installed. See
pages 10 and 18.
pages 10 and 18.
Remove all pieces of misfed paper.
See page 31.
See page 31.
Store copy paper flat in the wrapper in a dry
location. See page 51.
location. See page 51.
Open the platen cover completely and then
place the original on the original table.
Close the platen cover.
place the original on the original table.
Close the platen cover.
If the original includes large black solid area,
the original size may not be detected. Use the
TRAY SELECT key to select the desired size.
the original size may not be detected. Use the
TRAY SELECT key to select the desired size.
Copier does not operate.
Copies are too dark or
too light.
too light.
Blank copies
Paper misfeeds frequently.
Copies smear if rubbed.
COPIER TROUBLE?
Copier trouble?
Striped copies
Original size not selected
automatically.
automatically.
Click on the first or last page to see other AR-200 (serv.man11) service manuals if exist.