Read Sharp AR-161 (serv.man8) Service Manual online
B. Basic structure of scanner section
1
Copy lamp (Xenon lamp)
Generate photo energy to scan documents.
2
Reflector (Converging plate)
Collects light emitted from the copy lamp and radiate the document.
3
No. 1 mirror
Refracts the reflection light from the document to No. 2 mirror.
4
No. 2 mirror
Refracts the reflection light from No. 1 mirror.
5
No. 3 mirror
Refracts the reflection light from No. 2 mirror.
6
Lens
Converges reflected light from the document to form images on the CCD element.
7
No. 2/3 mirror unit
Includes No. 2/3 mirror. Driven in synchronization with the copy lamp unit.
8
Copy lamp unit
Includes the copy lamp, the reflector, and No. 1 mirror. Driven in synchronization with No. 2/3
mirror unit by the mirror motor.
mirror unit by the mirror motor.
9
CCD PWB
Reflected light (image) formed on the CCD is converted into electrical signals (analog signals)
then into digital signals and sent to the MCU.
then into digital signals and sent to the MCU.
10
Mirror motor
Drives the copy lamp unit and No. 2/3 mirror unit according to the scanning speed.
11
MHPS (Mirror home position sensor)
Detects the home position of No. 2/3 mirror unit.
12
Reference white plate
Reference white sheet for scanning documents. The reference line of magnification ratio
adjustment during SIM is also drawn.
adjustment during SIM is also drawn.
13
OC glass
Glass table to put a document on it.
The light from the light source (Xenon lamp) is reflected by a document and passed through three mirrors and reduction lenses to the CCD element
(image sensor) where images are formed. This system is known as the reduction image sensor system. Photo energy on the CCD element is
converted into electrical signals (analog signals). (Photo-electric conversion). The output signals (analog signals) are converted into digital signals
(A/D conversion) and passed to the MCU (main control/image process section). The resolution at that time is 400dpi. The mirror unit in the scanner
section is driven by the mirror motor. The MHPS is provided to detect the home position of the copy lamp unit.
(image sensor) where images are formed. This system is known as the reduction image sensor system. Photo energy on the CCD element is
converted into electrical signals (analog signals). (Photo-electric conversion). The output signals (analog signals) are converted into digital signals
(A/D conversion) and passed to the MCU (main control/image process section). The resolution at that time is 400dpi. The mirror unit in the scanner
section is driven by the mirror motor. The MHPS is provided to detect the home position of the copy lamp unit.
3. Process section
A. Basic structure
1
Main charger unit
Charges the OPC drum.
2
Cleaning blade
Collects waste toner on the OPC
drum.
drum.
3
OPC drum
Images are formed by laser beams
electrically, and toner is attached to
the image.
electrically, and toner is attached to
the image.
4
Transfer unit
Toner on the OPC drum is transferred
to the print paper by the potential
difference.
to the print paper by the potential
difference.
5
Resist roller
Makes synchronization between the
paper and the print image.
paper and the print image.
6
MG roller
Magnetic brush is formed by
developer to put toner on the OPC
drum.
developer to put toner on the OPC
drum.
7
(Laser beam)
Forms images on the OPC drum.
AR-160/161 FM/E [6] OPERATIONAL DESCRIPTIONS 11/27/1998
AR-161
6 – 2
Click on the first or last page to see other AR-161 (serv.man8) service manuals if exist.