AR-161 (serv.man6). AR161 Service Manual-External Views and Internal Structure - Sharp Copying Equipment Service Manual (repair manual). Page 5

Read Sharp AR-161 (serv.man6) Service Manual online

3. Operation Section
1
Interrupt key and indicator
2
Copy quantity display
3
ZOOM indicator
4
Copy ratio display key
5
Zoom keys
6
PAPER SIZE ENTER key
7
AUDIT CLEAR key
8
PAPER SIZE indicators
9
Alarm indicators
10
POWER SAVE indicator
11
SPF indicator
12
Output tray full indicator
13
B/W REVERSE key and indicator
14
XY-ZOOM key and indicator
15
SORT/GROUP key and indicators
16
ORIGINAL DATA indicator
17
2 IN 1 / 4 IN 1 key and indicators
18
AUTO/MANUAL/PHOTO key and
indicators
19
Light and dark keys and indicators
20
Numeric keys
21
Zero key
22
CLEAR key
23
START key and indicator
24
CLEAR ALL key
25
PRESET RATIO selector keys and
indicators
26
ORIGINAL SIZE ENTER key and
indicators
27
AUTO PAPER SELECT indicator
28
TRAY SELECT key
29
AUTO IMAGE key and indicator
30
Paper feed location/misfeed location
indicators
31
DUAL PAGE COPY key and indicator
32
ERASE key and indicators
33
MARGIN SHIFT key and indicator
*
1
ON:
Indicates that the machine is in the energy saving (pre-heat)
mode.
Blink: Indicates that the machine is in the process of resetting from
the energy saving mode or just after supplying the power.
(During warmup)
OFF: Indicates that resetting from the energy saving mode is com-
pleted and that the fusing temperature is in ready state.
The combinations of the above display lamps are as follows:
(
F
 = ON, 
D
 = OFF)
Lamp
Immediately after
power ON
Ready
Copying
Pre-heat lamp
Blink
D
D
Ready lamp
D
F
D
Other lamps
F
F
F
Lamp
Energy
saving mode
(Pre-heating)
Energy
saving mode
(Auto power
shut off)
Resetting
from energy
saving mode
Copy is
started during
resetting from
energy saving
mode
Pre-heat lamp
F
F
Blink
Blink
Ready lamp
F
D
F
D
Other lamps
F
D
F
F
*
Maintenance lamp
When the set count number (set by the simulation) is reached,
the lamp lights up. The machine does not stop.
TD cartridge replacement required indicator
When toner density is lower than a specified level, the TONER
DEVELOPER CARTRIDGE REPLACEMENT indicator lights up
to warn the user.
If toner is not added after approximately 10 sheets are copied,
the indicator starts blinking and machine starts to supply toner.
(Toner Developer cartridge replacement indicator keeps lighting
up)
If toner density is not back to specific level after two minutes, the
READ indicator goes out and Toner Developer indicator starts
blinking, and the copier stops.
Photoconductor cartridge replacement lamp
When the copy count reaches 29,000 after installing a
Photoconductor cartridge, the lamp lights up.
When 1,000 copy is made after that, the lamp blinks instead of
lighting. The machine does not stop.
Press and hold the clear key for 5 sec in the user simulation
mode to display the remaining life of the photoconductor
cartridge in 3 digits x 2 lines on the copy quantity display.
Paper required indicator
Misfeed indicator
AR-161
AR-160/161 FM/E [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 12/1/1998
4 – 2
Page of 9
Display

Click on the first or last page to see other AR-161 (serv.man6) service manuals if exist.