Read Sharp AR-161 (serv.man22) User Guide / Operation Manual online
46
GENERAL INFORMA
TION
Problem
Solution
●
Copier plugged in?
●
Power switch ON?
●
Copy density properly adjusted?
●
Is the original placed face down?
●
Paper too heavy?
●
Paper damp?
●
Is transfer charger clean?
●
Non-standard paper used?
●
Paper properly installed?
●
Pieces of paper inside copier?
●
Paper curled or damp?
Plug the copier into a grounded outlet.
See page 8.
See page 8.
Turn the power switch ON.
See page 14.
See page 14.
See pages 14 and 26.
Place the original face down on the original
table.
table.
Use copy paper within the specified range.
See page 49.
See page 49.
Replace with dry copy paper.
Be sure to store copy paper in a dry location.
See page 50.
Be sure to store copy paper in a dry location.
See page 50.
Clean the transfer charger.
See page 69.
See page 69.
Use standard paper. If using special paper,
feed the paper through the bypass tray.
See pages 18 and 49.
feed the paper through the bypass tray.
See pages 18 and 49.
Make sure the paper is properly installed. See
pages 10 and 18.
pages 10 and 18.
Remove all pieces of misfed paper.
See page 31.
See page 31.
Store copy paper flat in the wrapper in a dry
location. See page 50.
location. See page 50.
Copier does not operate.
Copies are too dark or
too light.
too light.
Blank copies
Paper misfeeds frequently.
Copies smear if rubbed.
COPIER TROUBLE?
Copier trouble?
Striped copies
Click on the first or last page to see other AR-161 (serv.man22) service manuals if exist.