AR-161 (serv.man21). AR161 Operation Manual-Section 1 - Sharp Copying Equipment User Guide / Operation Manual. Page 41

User programs

Settings of user programs No. 10 to 15 varies with the program number. For
setting of all programs, first follow steps 1 to 3 in “Setting the user programs”
on page 37 to select a program. (1. Press the light (

) key for more than 5

seconds. 2. Enter a program number (10 to 15) using the numeric keys. 3.
Press the START  key.) Then follow the appropriate instructions for the
program.

If the auditing mode is enabled, copying is limited to operators with an
assigned 3-digit account number. A maximum of 20, 3-digit account numbers
can be assigned. Use program No. 11 to register account numbers.
When program No. 10 is entered, the current setting (0: OFF, 1:ON) will
blink on the right side of the copy quantity display.

●

●

Any 3-digit number except “000” can be registered as an account
number.

●

If a number that is already registered or “000” is entered, the number
will blink in the copy quantity display.

Program No. 11 is used to register accounts. When program No. 11 is entered,
“

–––

” will blink in the copy quantity display.

●

If the number of accounts has reached the upper limit (20), “11E” will
appear in the copy quantity display. Press the 

 key. The copier will

return to step 2 on page 37.