AR-161 (serv.man119). 1.Earth Wire Treatment Of The 2nd Cassette Interface Harness. 2.Setting Change Of The Default Value Of The Preheat Transition Time Of AR200 For Europe. 3.Information About The Rear Exterior Mounting Procedure. 4.Default Setting Change Of SIM26-51 Copy Stop Setting . (WHITE) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Read Sharp AR-161 (serv.man119) Technical Bulletin online

DCE156
Sharp Electronics (UK) Ltd., Technical Services Group
 
Note 1: The open/close actuator and wire for hook of the printer connector must not
be deformed or damaged.
 
Note 2: Disassemble the rear exterior in reverse order to the above.
 4.Default setting change of SIM26-51 "Copy stop setting"   
1. Model Name:
AR161/200/205 Series, DM2000 Series
2. General:
As a result of specification change, the default setting of the SIM26-51 "Copy stop setting"
is changed as follows.
3. Description:
The default settings of Sim26-51 for the Duplex models are as follows.
Simplex model
Duplex model
Except for SEC/SUK
"0: Not stopped"
SEC/SUK
"1: Stopped"
All destinations
"1: Stopped"
Simplex model :
AR161/200, DM2000
Duplex model :   
AR205
4. Action:
AR205: Executed from the 1st unit of the production.
Page of 3
Display

Download Sharp AR-161 (serv.man119) Technical Bulletin