Read Sharp AR-161 (serv.man11) Service Manual online
3) Press the START key.
•
The selected function code is changed from blinking to lighting.
•
The currently set code blinks on the digit of 1.
Cancel: When the "E" (error code) is lighted on the digit of 1, press
the clear key and return to procedure 2.
4) Perform setting of the department counter.
Perform setting referring to "F.Copy quantity delete" in "A.
Department counter setting/cancel."
Department counter setting/cancel."
5) Press the density adjustment key
to end the setting proce-
dure.
•
lamps go off.
•
The copy quantity display returns to the normal display.
A. Department counter setting/cancel (Function
code: 0)
Used to set or cancel the department counter. When this setting is
made, the copy quantity display lights up with "--."
made, the copy quantity display lights up with "--."
Under this state, the department number in 3 digits must be entered
to operate the machine.
to operate the machine.
After entering the function code "0," use the numeric key to set or
cancel the department counter.
cancel the department counter.
1) To set the department counter, select "1." To cancel, select "0."
Then press the START key.
Memo: After this setting, use the "Department number recording" to
record the department number of each department.
(Max. 20 departments can be recorded.)
(Max. 20 departments can be recorded.)
2) Press the clear key.
B. Department number recording (Function code:
11)
Used to record the department number.
When the function code "1" is entered, the copy quantity display
blinks with "--."
blinks with "--."
When the recorded department number reaches 20, the error code of
"11E" is displayed.
1) Use the numeric key to enter the number of 3 digits (except for
000) and press the START key.
•
When the recorded number or "000" is entered, the entered
number blinks. In this case, enter another number.
number blinks. In this case, enter another number.
•
To register another department number, repeat the same pro-
cedure 1) above.
cedure 1) above.
2) After completion of recording, press the clear key.
•
The registered department number and each department name
must be recorded. (Since the department name cannot be
registered, they must be recorded for total calculation.)
must be recorded. (Since the department name cannot be
registered, they must be recorded for total calculation.)
C. Department number change (Function code: 12)
Used to change the department number.
Enter the function code "12" and select the department number to be
registered.
registered.
If there is no registered department number, the error code of "12E"
is displayed.
is displayed.
1) Select the department number with % key, and press the START
key.
•
The copy quantity display shows "- - - - ."
2) Use the numeric key to enter a new department number (3 digits
except for 000), and press the START key.
•
When the recorded number or "000" is entered, the entered
number blinks. In this case, enter another number.
number blinks. In this case, enter another number.
•
To register another department number, repeat the same pro-
cedures 1) and 2) above.
cedures 1) and 2) above.
3) After completion of changing, press the clear key.
D. Department number delete (Function code 13)
Delete the department number.
Enter the department code (13) and select all departments clear or
specified department clear.
specified department clear.
When there is no registered department number, the error code "13E"
is displayed.
is displayed.
(1) All departments clear
1) Press "1" key.
2) Press the START key.
(2) Specified department clear
1) Press "0" key.
2) Select the department number to be deleted with % key.
3) Press the START key.
E. Copy quantity display (sum total) (Function
code: 14)
The copy quantity of each department is displayed.
Enter the function code "14" and select the department number of
which the total copy quantity is to be displayed.
which the total copy quantity is to be displayed.
If there is no registered department number, the error code "14E" is
displayed.
displayed.
1) Select the department number with % key.
2) Press and hold "0" key, and the copy quantity will be displayed.
•
The copy quantity is displayed in two steps.
(Example) Copy quantity: 12, 345
•
To display the copy quantity of another department, repeat the
same procedure 1) and 2).
same procedure 1) and 2).
3) Press the clear key to terminate the procedure.
F. Copy quantity clear (total clear) (Function code:
15)
The copy quantity of each department is cleared.
After entering the function code "15", select all department clear or
specified department clear.
specified department clear.
If there is no registered department, the error code "15E" is dis-
played.
played.
(1) All department total clear
1) Press "1" key.
2) Press the START key.
(2) Specified department clear
1) Press "0" key.
2) Select the department number with % key.
3) Press the START key.
AR-161
AR-160/161 FM/E [9] USER PROGRAM 11/27/1998
9 – 3
Click on the first or last page to see other AR-161 (serv.man11) service manuals if exist.