AR-161 (serv.man10). AR161 Service Manual-Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 10

Read Sharp AR-161 (serv.man10) Service Manual online

Main
code
Sub
code
Contents
Details of operation
Initial
value
Set range
26
5
Counter mode setting
Used to set the print counter mode in A3 or 11" 
×
 17".
Used to display the currently set counter value with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.
Key operation/Display
0: Total/Developer = 2 counts
Maintenance = 2 counts
1: Total/Developer = 1 count
Maintenance = 2 counts
2: Total/Developer = 2 counts
Maintenance = 1 count
3: Total/Developer = 1 count
Maintenance = 1 count
6
Destination setting
Used to display the current destination setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored. 
Key operation/Display
 0: Japan
 1: USA (Inch series)
  2: Canada (Inch series)
  3: Germany (AB series)
  4: UK (AB series)
  5: Australia (AB series)
  6: France (AB series)
  7: EX inch series
 8: EX AB series
  9: EX inch series (FC conformity)
10: EX AB series (FC conformity)
11: Taiwan, China (AB series)
22
Language setting
Used to display the current setting of the language information with the
number at right. After entering the set value, press the start key, and the
set value is stored.
Key operation/Display
0: Japanese
1: English
2: French
3: German
4: Italian
5: Dutch
6: Swedish
7: Spanish
30
CE mark conformity
control setting
Used to display the current setting of CE mark conformity control with the
number at right. After entering the set value, press the start key, and the
set value is stored.
Key operation/Display
0: CE mark control OFF
1: CE mark control ON
30
1
Machine sensor operation
check 
Used to check the sensors in the machine transport system with LED on
the operation panel.
Display
<Lighting at sensor ON>
Paper entry sensor: Machine position JAM LED
Duplex sensor: SPF JAM LED
Paper exit sensor: JAM LED
No. 2 cassette transport sensor: No. 2 cassette position JAM LED
No. 3 cassette transport sensor: No. 3 cassette position JAM LED
No. 4 cassette transport sensor: No. 4 cassette position JAM LED
41
2
OC document sensor
adjustment
Used to read the document sensor input value with paper and perform
the sensor detection level adjustment. For the adjustment procedure of
the document sensor input value, refer to the previous descriptions.
AR-160/160 FM/E [8] SIMULATION 12/1/1998
AR-161
8 – 7
Page of 13
Display

Click on the first or last page to see other AR-161 (serv.man10) service manuals if exist.