AR-161 (serv.man10). AR161 Service Manual-Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 9

Main
code

Sub

code

Contents

Details of operation

Initial
value

Set range

22

16

Duplex print counter
display

Used to display the current duplex print counter value. 

∗

1

17

Copy counter display

Used to display the current copy counter value. 

∗

1

18

Printer counter display

Used to display the current printer counter value. 

∗

1

19

Electronic sort counter
display

Used to display the current electronic sort counter value. 

∗

1

20

FAX print counter display

Used to display the current FAX print counter value. 

∗

1

21

Scanner counter display

Used to display the current scanner counter value.

24

1

JAM memory, JAM
counter clear 

Used to clear the JAM memory and the JAM counter. 

∗

2

2

Trouble memory clear

Used to clear the trouble memory. 

∗

2

4

SPF counter clear

Used to clear the SPF counter. 

∗

2

5

Duplex counter clear

Used to clear the duplex counter. 

∗

2

6

Paper feed counter clear

Used to clear the paper feed counter. 

∗

2

7

Drum counter clear

Used to clear the drum counter. 

∗

2

8

Copy counter clear

Used to clear the copy counter. 

∗

2

9

Printer counter clear

Used to clear the printer counter. 

∗

2

10

Electronic sort counter
clear

Used to clear the electronic sort counter. 

∗

2

11

FAX print counter clear

Used to clear the FAX print counter. 

∗

2

13

Scanner counter clear

Used to clear the scanner counter.

25

1

Main motor operation
check 

Used to drive the main motor for 30 sec. At that time, the cooling motor
rotates at a low speed.
When the developing unit is installed, the developing bias, the grid, and
the main charger are driven.
When the developing unit is not installed, only the main motor is driven. 

10

Polygon motor operation
check 

Used to drive the polygon motor for 30 sec. 

26

1

Operation switch display

Used to display the installed option on the operation panel. (The LED
corresponding to the installed option is lighted.)

Key operation

Display

Display select: 
    Magnification ratio key

<Lighting with an option installed>
When "A" is displayed:
Shifter: Paper empty LED
Job separator: JAM LED
SPF: SPF select LED
RSPF: SPF JAM LED

Dehumidifying heater: Main body JAM LED

Simplex mode: Multi manual paper feed select LED

Cassette (2nd step): No. 2 cassette select LED

Cassette (3rd step): No. 3 cassette select LED

Cassette (4th step): No. 4 cassette select LED

Memory installed: Paper empty LED

FAX: JAM LED

Printer: Main body JAM LED

ERDH: Main cassette select LED

16CPM: SPF JAM LED

20CPM: SPF select LED

Document sensor: Auto paper select LED

3

Auditor setting

Used to display the current auditor setting with the numbers at right. 
After entering the set value, press the start key, and the set value is
stored. 

Key operation/Display

0: Built-in auditor

1: Coin vendor

2: Others

∗

1: Each counter display method

To display 12345: 123 (0.75 sec) 

→

 Blank (0.35sec) 

→

 456 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 repetition

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35sec) 

→

 000 (0.75 sec) 

→

 Blank (1.05 sec) 

→

 Repetition

AR-160/160 FM/E [8] SIMULATION 12/1/1998

AR-161

8 – 6