AR-161 (serv.man10). AR161 Service Manual-Simulations - Sharp Copying Equipment Service Manual (repair manual). Page 4

Read Sharp AR-161 (serv.man10) Service Manual online

[8] SIMULATION
1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
Clear key 
 Interruption key 
 Shift key 
 Interruption key 
 Start
key 
 Sub code 
 Start key
2. Cancelling the simulation mode
When the all clear key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and
the screen returns to the sub code entering display.
3. List of simulations
Main 
code
Sub
code
Contents
1
1
Mirror unit operation check 
2
Optical system sensor operation check
2
1
SPF aging
2
SPF sensor operation check 
3
SPF motor forward rotation operation check 
4
SPF motor reverse rotation operation check 
8
SPF paper feed solenoid operation check
9
SPF reverse solenoid operation check 
10
SPF paper exit gate solenoid operation check 
11
SPF PS release solenoid operation check 
3
2
Shifter job separator sensor operation check 
3
Shifter operation check
4
Job separator operation check
10
Job separator home position check  
5
1
Operation panel display check 
2
Heater lamp lighting check, cooling fan motor
operation check 
3
Copy lamp lighting check 
6
1
Paper feed solenoid operation check 
10
Main cassette semi-circular roller drive
7
1
Aging with JAM with warmup time display
2
Aging without JAM with warmup time display
4
Warmup saving
6
Intermittent aging (with paper)
7
Intermittent aging (without paper)
8
Warmup time display
8
1
Developing bias voltage output check 
2
Main charger voltage output check (Grid bias high
mode)
3
Main charger voltage output check (Grid bias low
mode)
6
Transfer charger voltage check 
9
1
Duplex motor forward rotation operation check 
2
Duplex motor reverse rotation operation check 
4
Duplex motor rotation speed adjustment
5
Duplex motor switchback time adjustment
10
Toner motor operation check 
14
Trouble (except for U2) cancel
16
U2 trouble cancel
17
PF trouble cancel
20
1
Maintenance counter clear
21
1
Maintenance cycle setting
2
Mini maintenance counter display
22
1
Maintenance counter display
Main 
code
Sub
code
Contents
22
2
Maintenance preset value display
3
JAM memory display
4
Total JAM counter display
5
Total counter display
6
Developing counter display
7
Developing preset counter value display
8
SPF counter display
9
Paper feed counter display
12
Drum counter display 
14
Flash ROM version display
15
Trouble memory display
16
Duplex print counter display
17
Copy counter display
18
Printer counter display 
19
Electronic sort counter display
20
FAX print counter display 
21
Scanner counter display
24
1
JAM memory, JAM counter clear  
2
Trouble memory clear
4
SPF counter clear 
5
Duplex counter clear
6
Paper feed counter clear 
7
Drum counter clear
8
Copy counter clear
9
Printer counter clear 
10
Electronic sort counter clear
11
FAX print counter clear
13
Scanner counter clear
25
1
Main motor operation check 
10
Polygon motor operation check 
26
1
Operation switch display
3
Auditor setting
5
Counter mode setting
6
Destination setting
22
Language setting
30
CE mark conformity control setting 
30
1
Machine sensor operation check 
41
2
OC document sensor adjustment
3
Document sensor light reception level display
42
1
Developer counter clear 
43
1
Fusing temperature setting
46
1
Copy density level adjustment
2
FAX density level adjustment
48
1
Main scanning (front/rear) direction magnification
ratio adjustment(Copy/FAX/OC-SPF common)
2
OC mode sub scanning direction magnification
ratio adjustment in copying
5
SPF mode sub scanning direction magnification
ratio adjustment in copying
6
OC mode sub scanning direction magnification
ratio adjustment in FAX
7
SPF mode sub scanning direction magnification
ratio adjustment in FAX
50
1
Copy image lead edge position adjustment
10
Paper off center adjustment
13
OC mode document off center adjustment
16
SPF mode document off center adjustment
51
2
Resist amount adjustment
63
1
Shading data check 
AR-160/160 FM/E [8] SIMULATION 12/1/1998
AR-161
8 – 1
Page of 13
Display

Click on the first or last page to see other AR-161 (serv.man10) service manuals if exist.