AR-122E (serv.man9). Sect 10. Simulation Trouble Codes - Sharp Copying Equipment Service Manual (repair manual). Page 6

AR-122E/152E/153E/157E  SIMULATION, TROUBLE CODES  10 - 6

25

01

Main motor operation check (Cooling fan motor rotation check)
When the PRINT switch is pressed, the main motor (as well as the duplex motor in the duplex model) is operated for 30 sec. If the 
developing unit is installed at that time, the developing bias, the main charger, and the grid are outputted together in order to avoid 
toner consumption. Since, in this case, laser discharge is required when stopping the motor, the polygon motor is rotated at the same 
time. If the developing unit is not installed, the above high voltage is not outputted and only the motor is rotated.

: Do not execute this simulation by forcibly turning ON the door ON/OFF switch.

10

Polygon motor ON  
(Operation/Procedure)  
When the START key is pressed, the polygon motor is operated for 30 sec.

26

01

Manual feed setup
(Operation/Procedure)
1. When this simulation is executed, the currently set bypass code number is displayed.
2. Enter the code number corresponding to the bypass and press the START key, and the setting will be changed.

02

(R) SPF setup
When this simulation is executed, the current setup of the SPF code number is displayed. Enter the code number corresponding to the 
SPF and press the PRINT switch to enable the setup. 

03

Second cassette setup
(Operation/Procedure)
1. When this simulation is executed, the currently set code number of the second cassette is displayed.
2. Enter the code number and press the start key. The setting is changed.

04

Machine duplex setup
(Operation/Procedure)
1. When this simulation is executed, the currently set duplex code number is displayed.
2. Enter the code number corresponding to the duplex and press the ENTER key, and the setup will be changed.

06

Destination setup
When this simulation is executed, the current setup of the destination code number is displayed. Enter the code number corresponding 
to the destination and press the PRINT switch to enable the setup.

07

Machine conditions check
When this simulation is executed, the current machine setup is displayed.

Main 
code

Sub 

code

Content

Code number

Bypass

0

Single bypass

1

Multi bypass

Code number

SPF

0

SPF not installed

1

SPF installed

2

RSPF installed

Code number

Second cassette

0

Without second cassette

1

With second cassette

Code number

Duplex

0

Without Duplex

1

With Duplex

Code number

Destination

0

Inch series

1

EX JAPAN  AB series

2

JAPAN AB series

3

China (EX JAPAN AB series + Chinese paper support)

CPM

Copy quantity display

10 cpm 

10

12 cpm 

12

13 cpm

13

14 cpm

14

15 cpm 

15