Read Sharp AR-122E (serv.man58) User Guide / Operation Manual online
16
Automatic exposure adjustment
The automatic exposure level can be adjusted to suit your copying needs. This level is
set for copying from the original table.
set for copying from the original table.
1
Press the exposure mode selector key to
select the PHOTO (
select the PHOTO (
) mode.
2
Press and hold down the exposure mode
selector key for approximately 5 seconds.
The PHOTO (
selector key for approximately 5 seconds.
The PHOTO (
) indicator will go out and
the AUTO indicator will begin to blink. One
or two light and dark indicators
corresponding to the automatic exposure
level which has been selected will light up.
or two light and dark indicators
corresponding to the automatic exposure
level which has been selected will light up.
3
Press the light (
) or dark (
) key to
lighten or darken the automatic exposure
level as desired. If exposure level 2 is
selected, the two left-handmost indicators
for that level will light up simultaneously.
Also, if level 4 is selected, the two right-
handmost indicators for that level will
light up simultaneously.
level as desired. If exposure level 2 is
selected, the two left-handmost indicators
for that level will light up simultaneously.
Also, if level 4 is selected, the two right-
handmost indicators for that level will
light up simultaneously.
4
Press the exposure selector key. The AUTO indicator will stop
blinking and light up steadily.
blinking and light up steadily.
This automatic exposure level will remain in effect until you change it
again by this procedure.
again by this procedure.
Click on the first or last page to see other AR-122E (serv.man58) service manuals if exist.