AR-122E (serv.man57). Sect. 4 Special Functions - Sharp Copying Equipment User Guide / Operation Manual

ar-122e (serv.man57) user guide / operation manual
Model
AR-122E (serv.man57)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
101.03 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / Sect. 4 Special Functions
File
ar-122e-sm57.pdf
Date
Next: Sharp AR-122E (serv.man58) User Guide / Operation Manual

Read Sharp AR-122E (serv.man57) User Guide / Operation Manual online

18
This chapter describes the special functions of this unit. Use these functions as 
needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode (page 18)
Reduces toner consumption by approximately 10%.
Power save modes (page 19)
The unit has two power save modes of operation: preheat mode and auto power 
shut-off mode.
Preheat mode
When the unit enters the preheat mode, the power save (
) indicator will light up 
and other indicators will remain on or off as before. In this condition, the fuser in 
the unit is maintained at a lower heat level, thereby saving power. To copy from 
the preheat mode, make desired copier selections and press the start (
) key 
using the normal copying procedure.
Auto power shut-off mode
When the unit enters the auto power shut-off mode, the power save (
) indicator 
will light up and other indicators except the ONLINE indicator will go out. The auto 
power shut-off mode saves more power than the preheat mode but requires a 
longer time before starting copying. To copy from the auto power shut-off mode, 
press the start (
) key. Then make desired copier selections and press the start 
(
) key using the normal copying procedure.
Auto clear (page 19)
The unit returns to the initial settings a preset amount of time after the end of copy, or 
scanner job. This preset amount of time (auto clear time) can be changed.
Resolution of AUTO & MANUAL mode (page 19)
You can set the copy resolution used for AUTO and MANUAL (
) exposure 
mode.
TONER SAVE MODE
1
Press the exposure mode selector key 
to select the MANUAL (
) mode.
4
SPECIAL FUNCTIONS
19
4
2
Press and hold down the exposure mode 
selector key for approximately 5 seconds. 
The MANUAL (
) indicator will go out 
and the PHOTO (
) indicator will begin 
to blink. The light and dark indicator 
marked "5" will light up, indicating the 
standard toner mode is active.
3
To enter the toner save mode, press the 
light (
) key. The light and dark 
indicator marked "1" will light up, 
indicating the toner save mode is 
selected.
4
Press the exposure mode selector key. The PHOTO (
) 
indicator will stop blinking and will light up steadily. The light 
and dark indicator marked "3" will light up. The toner save 
mode is now active.
USER PROGRAMS
The user programs allow the parameters of certain functions to be set, changed, or 
cancelled as desired.
Setting the power save modes, auto clear time, stream 
feeding mode and resolution of AUTO & MANUAL mode
1
Press and hold down the light (
) and dark (
) keys 
simultaneously for more than 5 seconds until all the alarm 
indicators (
, 
, 
, 
) blink and "
" appears in the 
display.
2
Use the left copy quantity (
) key to select a user program 
number (1: auto clear time, 2: preheat mode, 3: auto power 
shut-off timer, 5: auto power shut-off mode 6: resolution of 
AUTO & MANUAL mode). The selected number will blink in the 
left side of the display.
3
Press the start (
) key. The entered program number will be 
steadily lit and the currently selected parameter number for the 
program will blink on the right side of the display.
4
Select the desired parameter using the right copy quantity (
) 
key. The entered parameter number will blink on the right of the 
display.
To return to the standard mode, repeat the procedure but use the dark 
(
) key to select exposure level "5" in step 3.
20
* Factory default settings are indicated with an asterisk (*).
5
Press the start (
) key. The right-hand number in the display 
6
Press the light (
) or dark (
) key to return to the normal 
copy mode.
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
1
Press the clear (
) key to reset the display to zero.
2
Press and hold down the clear (
) key for approximately 5 
seconds. The total number of copies will appear in two steps, 
each with three digits.
Example: Total number of copies is 1,234.
Program 
No.
Mode
Parameters
1
Auto clear time
0 
 OFF, 1 
 10sec., 2 
 30sec.
*3  
60sec., 
4  
90sec., 
5  
120sec.
2
Preheat mode
*0 
 30sec., 1 
 60sec., 2 
 90sec.
3
Auto power shut- off 
timer
0 
 2min., *1 
 5min., 2 
 15min.,
3 
 30min., 4 
 60 min., 5 
 120min.
5
Auto power shut- off 
mode
0 
 OFF, *1 
 ON
6
Resolution of AUTO 
& MANUAL mode
*0 
 300dpi, 1 
 600dpi
To change the setting or to set another mode, press the clear 
(
) key. The unit will return to step 2.
Page of 3
Display

Download Sharp AR-122E (serv.man57) User Guide / Operation Manual

Here you can read online and download Sharp AR-122E (serv.man57) User Guide / Operation Manual in PDF. AR-122E (serv.man57) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-122E (serv.man57) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

AR-122E (serv.man57) Service Manuals

Preview DownloadPagesSize
AR-122E (serv.man3) Service Manual Complete Service Manual 127 6.58 MB
AR-122E (serv.man4) Cover Service Manual 8 230.86 KB
AR-122E (serv.man5) Sect 14. Circuit Diagram Service Manual 22 1.45 MB
AR-122E (serv.man6) Sect 13. Electrical Section Service Manual 13 292.61 KB
AR-122E (serv.man7) Sect 12. User Programs Service Manual 2 45.43 KB
AR-122E (serv.man8) Sect 11. Maintenance Service Manual 1 71.07 KB
AR-122E (serv.man9) Sect 10. Simulation Trouble Codes Service Manual 17 141.14 KB
AR-122E (serv.man10) Sect 9. Adjustments Service Manual 7 205.7 KB
AR-122E (serv.man11) Sect 8. Disassembly Assembly Service Manual 30 3.22 MB
AR-122E (serv.man12) Sect 7. Operational Description Service Manual 8 368.96 KB
AR-122E (serv.man13) Sect 6. Copy Process Service Manual 4 110.86 KB
AR-122E (serv.man14) Sect 5. Unpacking Installation Service Manual 4 437.47 KB
AR-122E (serv.man15) Sect 4. External Views Internal Structures Service Manual 7 377.88 KB
AR-122E (serv.man16) Sect 3. Consumable Parts Service Manual 3 118.21 KB
AR-122E (serv.man17) Sect 2. Specifications Service Manual 3 59 KB
AR-122E (serv.man18) General Service Manual 1 138.91 KB
AR-122EN (serv.man2) Please also refer to AR122E) Service Manual 18 904.3 KB
AR-122E (serv.man52) Online Manual User Guide / Operation Manual 36 2.47 MB
AR-122E (serv.man53) Sect. 8 Appendix User Guide / Operation Manual 3 70.72 KB
AR-122E (serv.man54) Sect. 7 Optional Equipment (AL-12PKM) User Guide / Operation Manual 29 537.19 KB
AR-122E (serv.man55) Sect. 6 Troubleshooting User Guide / Operation Manual 6 176.85 KB
AR-122E (serv.man56) Sect. 5 Maintenance User Guide / Operation Manual 5 272.67 KB
AR-122E (serv.man58) Sect. 3 Making Copies User Guide / Operation Manual 7 223.18 KB
AR-122E (serv.man59) Sect. 2 Loading the Paper User Guide / Operation Manual 4 118.46 KB
AR-122E (serv.man60) Sect.1 Introduction User Guide / Operation Manual 3 136.19 KB
AR-122E (serv.man61) Contents User Guide / Operation Manual 5 133.68 KB
AR-122EN (serv.man9) Please see AR122E Operation Manual User Guide / Operation Manual 5 133.68 KB
AR-122E (serv.man87) Win2K GDI Driver (v2.8A.006)with WHQL Drivers 772.21 KB
AR-122E (serv.man88) WinXP GDI Driver (v2.8A.006)with WHQL Drivers 772.21 KB
AR-122E (serv.man89) WinNT4.0 GDI Driver (v2.8A.006) Drivers 802.74 KB
AR-122E (serv.man90) WinMe GDI Driver (v2.8A.006) Drivers 858.18 KB
AR-122E (serv.man91) Win9X GDI Driver (v2.8A.006) Drivers 889.6 KB
AR-122EN (serv.man28) Win2K GDI Driver (v2.8A.006)with WHQL Drivers 772.21 KB
AR-122EN (serv.man29) WinXP GDI Driver (v2.8A.006)with WHQL Drivers 772.21 KB
AR-122EN (serv.man30) WinNT4.0 GDI Driver (v2.8A.006) Drivers 802.74 KB
AR-122EN (serv.man31) WinMe GDI Driver (v2.8A.006) Drivers 858.18 KB
AR-122EN (serv.man32) Win9X GDI Driver (v2.8A.006) Drivers 889.6 KB
AR-122E (serv.man93) AR122E Driver for Windows Vista. Windows Vista Drivers 6.45 MB
AR-122EN (serv.man33) AR122E Driver for Windows Vista Drivers 6.45 MB
AR-122E (serv.man19) Information of parts change Parts Guide 2 28.25 KB
AR-122E (serv.man20) Information of parts change. Parts Guide 4 30.17 KB
AR-122E (serv.man21) Strength increase of the turn over gate to prevent breakage. Parts Guide 3 58.91 KB
AR-122E (serv.man22) Information of parts change To improve productivity, the L pulley has been changed. Parts Guide 2 20.3 KB
AR-122E (serv.man23) Parts Change 250 sheet tray. Parts Guide 2 22.68 KB
AR-122E (serv.man24) Parts Guide Complete Parts Guide 44 1.62 MB
AR-122E (serv.man25) Back Cover Parts Guide 2 29.38 KB
AR-122E (serv.man26) Index Parts Guide 8 94.24 KB
AR-122E (serv.man27) Sect 29 to 31. DC power supply PWB Parts Guide 5 56.36 KB
AR-122E (serv.man28) Sect 28. MCU PWB contd. Parts Guide 2 28.24 KB
AR-122E (serv.man29) Sect 27 28. Operation MCU PWB Parts Guide 1 23.83 KB
AR-122E (serv.man30) Sect 26. Packing materials accessories Parts Guide 1 94.1 KB
AR-122E (serv.man31) Sect 25. 2ND paper feeding unit(AR157E) Parts Guide 1 76.77 KB
AR-122E (serv.man32) Sect 23 24. Harness 2ND frame unit (AR157E) Parts Guide 1 104.01 KB
AR-122E (serv.man33) Sect 22. 250 sheet tray Parts Guide 1 69.36 KB
AR-122E (serv.man34) Sect 20 21. Socket holder TC case unit Parts Guide 1 60.87 KB
AR-122E (serv.man35) Sect 19. Multi manual paper feeding unit Parts Guide 2 102.26 KB
AR-122E (serv.man36) Sect 18. Single manual paper feeding unit Parts Guide 1 66.82 KB
AR-122E (serv.man37) Sect 16 17. Single multi manual paper feeding cover unit Parts Guide 1 41.44 KB
AR-122E (serv.man38) Sect 15. Drive unit Parts Guide 1 81.11 KB
AR-122E (serv.man39) Sect 14. Fusing unit Parts Guide 2 119.2 KB
AR-122E (serv.man40) Sect 13. Base plate unit 2 Parts Guide 1 135.33 KB
AR-122E (serv.man41) Sect 12. Base plate unit 1 Parts Guide 2 139.43 KB
AR-122E (serv.man42) Sect 11. Middle frame Parts Guide 1 109.8 KB
AR-122E (serv.man43) Sect 9 10 LSU Delivery paper guide unit Parts Guide 1 69.28 KB
AR-122E (serv.man44) Sect 8. Optical frame Parts Guide 1 104.17 KB
AR-122E (serv.man45) Sect 7. Side door unit Parts Guide 1 92.84 KB
AR-122E (serv.man46) Sect 6. Operation panel Parts Guide 1 76.72 KB
AR-122E (serv.man47) Sect 5. RSPF SPF pick up unit(AR157E) Parts Guide 1 62.43 KB
AR-122E (serv.man48) Sect 4. RSPF transport unit(AR157E) Parts Guide 1 103 KB
AR-122E (serv.man49) Sect 3. RSPF Exteriors (AR157E) Parts Guide 2 145.65 KB
AR-122E (serv.man50) Sect 1 2 Exteriors Original Cover Unit Parts Guide 2 85.19 KB
AR-122E (serv.man51) Front Cover Contents Parts Guide 1 31.17 KB
AR-122EN (serv.man3) Information of parts change Parts Guide 2 28.25 KB
AR-122EN (serv.man4) Information of parts change. Parts Guide 4 30.17 KB
AR-122EN (serv.man5) Strength increase of the turn over gate to prevent breakage. Parts Guide 3 58.91 KB
AR-122EN (serv.man6) Information of parts change To improve productivity, the L pulley has been changed. Parts Guide 2 20.3 KB
AR-122EN (serv.man7) Parts Change 250 sheet tray. Parts Guide 2 22.68 KB
AR-122EN (serv.man8) Parts listing Parts Guide 18 904.3 KB
AR-122E (serv.man2) Specifications Specification 3 59 KB
AR-122EN Information of parts guide, OC gasket. Specification 2 294.08 KB
AR-122E (serv.man64) Starting Powder List (This list takes priority over information in Service Manuals). Technical Bulletin 4 66.25 KB
AR-122E (serv.man65) Change in material of turn plate sheet. Technical Bulletin 3 57.76 KB
AR-122E (serv.man66) Manual paper feed roller material change. Technical Bulletin 5 342.3 KB
AR-122E (serv.man67) Parts Changes. Technical Bulletin 2 29.35 KB
AR-122E (serv.man68) Countermeasures against toner scattering in the process unit section. Technical Bulletin 2 62.83 KB
AR-122E (serv.man69) Improvement of the scanner's dust-proof property Technical Bulletin 6 558.43 KB
AR-122E (serv.man70) Supply of the upper heat roller for preventing toner adhesion, as a service part. Technical Bulletin 2 40.18 KB
AR-122E (serv.man71) Change of operation pwb to comply with RoHS. Technical Bulletin 4 98.25 KB
AR-122E (serv.man72) 1. Main motor change, 2 - AC power cord change. Technical Bulletin 3 100.5 KB
AR-122E (serv.man73) 1. Standardising the the MC harness unit, 2. Changing the CD-ROM, 3. Changing the screws to comply with RoHS. Technical Bulletin 6 1.08 MB
AR-122E (serv.man74) 1. Changing the MCU PWB, 2. Changing the shafts to comply with RoHS, 3. Changing the LSU unit to comply with RoHS, 4. Changing ht erollers to comply with RoHS Technical Bulletin 9 403.35 KB
AR-122E (serv.man75) MCU PWB part change info Technical Bulletin 3 79.55 KB
AR-122E (serv.man76) ROM version upgrade...v3.11 Technical Bulletin 1 7.03 KB
AR-122E (serv.man77) Information of parts change, 1 Transport belt change, 2 MFD sensor PWB change, 3 Transport clutch change, 4 DV bearing change, 5 Standardisation of separator pawl, 6 POD PPD1 sensor PWB change. Technical Bulletin 6 342.13 KB
AR-122E (serv.man78) 1. Rear cover change, 2. Scanner motor change, 3. Shape change of the U-turn guide lower Technical Bulletin 3 68.51 KB
AR-122E (serv.man79) Information of parts change. DV Box Unit and Base Tray R. Technical Bulletin 1 10.78 KB
AR-122E (serv.man80) 1 Changing the 250-sheet casstte pawls F and R to cmply with RoHS, 2 Changing the SPF and the RSPF hinges to comply with RoHS. 3 Changing the DMX roller to comply with RoHS. Technical Bulletin 4 107.58 KB
AR-122E (serv.man81) 1 Changing the PPD2 sensor PWB to comply with RoHS. 2 Changing the SPF sensor PWB to comply with RoHS. Technical Bulletin 2 46.22 KB
AR-122E (serv.man82) 1 Standardising the roller r (pick up roler) in the manual paper feeding section. 2 Changing to lead-free operation PWB and IF PWB. 3 Changing the high voltage PWB to comply with RoHS. Technical Bulletin 3 68.66 KB
AR-122E (serv.man83) Information of parts change, OC gasket. Technical Bulletin 2 294.08 KB
AR-122E (serv.man84) 003-Information of parts change. Technical Bulletin 1 81.36 KB
AR-122E (serv.man85) Supply of component parts list for the DV Units Technical Bulletin 2 158.49 KB
AR-122E (serv.man86) Countermeasure against noise when operating the machine Technical Bulletin 2 549.45 KB
AR-122EN (serv.man11) Starting Powder List (This list takes priority over information in Service Manuals). Technical Bulletin 4 66.25 KB
AR-122EN (serv.man12) Change in material of turn plate sheet. Technical Bulletin 3 57.76 KB
AR-122EN (serv.man13) Manual paper feed roller material change. Technical Bulletin 5 342.3 KB
AR-122EN (serv.man14) Parts Changes. Technical Bulletin 2 29.35 KB
AR-122EN (serv.man15) Countermeasures against toner scattering in the process unit section. Technical Bulletin 2 62.83 KB
AR-122EN (serv.man16) Improvement of the scanner's dust-proof property Technical Bulletin 6 558.43 KB
AR-122EN (serv.man17) Supply of the upper heat roller for preventing toner adhesion, as a service part. Technical Bulletin 2 40.18 KB
AR-122EN (serv.man18) Change of operation pwb to comply with RoHS. Technical Bulletin 4 98.25 KB
AR-122EN (serv.man19) 1. Main motor change, 2 - AC power cord change. Technical Bulletin 3 100.5 KB
AR-122EN (serv.man20) 1. Standardising the the MC harness unit, 2. Changing the CD-ROM, 3. Changing the screws to comply with RoHS. Technical Bulletin 6 1.08 MB
AR-122EN (serv.man21) 1. Changing the MCU PWB, 2. Changing the shafts to comply with RoHS, 3. Changing the LSU unit to comply with RoHS, 4. Changing ht erollers to comply with RoHS Technical Bulletin 9 403.34 KB
AR-122EN (serv.man22) ROM version upgrade...v3.11 Technical Bulletin 1 7.04 KB
AR-122EN (serv.man23) Information of parts change. DV Box Unit and Base Tray R. Technical Bulletin 1 10.78 KB
AR-122EN (serv.man24) 1 Changing the 250-sheet casstte pawls F and R to cmply with RoHS, 2 Changing the SPF and the RSPF hinges to comply with RoHS. 3 Changing the DMX roller to comply with RoHS. Technical Bulletin 4 107.58 KB
AR-122EN (serv.man25) 1 Changing the PPD2 sensor PWB to comply with RoHS. 2 Changing the SPF sensor PWB to comply with RoHS. Technical Bulletin 2 46.22 KB
AR-122EN (serv.man26) 1 Standardising the roller r (pick up roler) in the manual paper feeding section. 2 Changing to lead-free operation PWB and IF PWB. 3 Changing the high voltage PWB to comply with RoHS. Technical Bulletin 3 68.66 KB
AR-122EN (serv.man27) 001-Information of parts change. Technical Bulletin 1 81.36 KB
AR-122E (serv.man62) ROM version upgrade v3.11..to prevent L1-00 F5-02 Driver / Update 147.61 KB
AR-122E (serv.man63) MFP Driver -Win9x,Me,NT,2K XP Driver / Update 10.01 MB
AR-122EN (serv.man10) ROM version upgrade v3.11..to prevent L1-00 F5-02 Driver / Update 147.61 KB
AR-122E (serv.man92) Readme for Installation Driver / Update 353 B
AR-122E Handy Guide A122E N 152E N Handy Guide 22 265.56 KB

Random: