AR-122E (serv.man11). Sect 8. Disassembly Assembly - Sharp Copying Equipment Service Manual (repair manual). Page 4

Read Sharp AR-122E (serv.man11) Service Manual online

AR-122E/152E/153E/157E  DISASSEMBLY AND ASSEMBLY  8 - 4
2) Set the charger cleaner to the transfer unit, and move it recipro-
cally a few times in the direction of the arrow  shown in the figure
below.
F. Charger wire replacement
1) Remove the TC cover and remove the screw.
2) Remove the spring and remove the charger wire.
3) Install a new charger wire by reversing the procedures (1) and (2).
At that time, be careful of the following items.
• The rest of the charger wire must be within 1.5mm. Refer to Fig.1
• The spring hook section (charger wire winding section) must be in
the range of the projection section.
• Be careful not to twist the charger wire.
2. Operation panel section
A. List
B. Disassembly procedure
1) Open the side door, and Open the front cover.
2) Remove the screws (4 pcs.), the harness, and the operation panel
unit.
1)
2)
3)
4)
1mm
1.5mm
Fig.1
1)
1)
2)
3)
Charger wire
Protrusion
No.
Part name Ref.
1
Operation panel unit
2
Operation PWB
1)
2)
1)
1)
1)
1)
2)
3)
Page of 30
Display

Click on the first or last page to see other AR-122E (serv.man11) service manuals if exist.