AR-121E (serv.man2). AR121E-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 6

The table below shows the simulations which are not provided for the AR-120E/150E but newly added to the AR-121E/151E.
Simulation 26-38 of the SR-120E/150E is deleted in the AR-121E/151E.

Main code

Sub code

Contents

24

Special counter clear

06

Developer counter clear

26

Various setup

37
55

Cancel of stop at developer over
CRUM destination display

46

Exposure adjustment

19

γ

 Table adjustment (Copy mode)

Main code

Sub code

Content

24

06

Developer counter clear
When the PRINT switch is pressed, the developer count value is reset to 0.

26

37

Cancel of stop at developer life over
When this simulation is executed, the current set code is displayed. Enter a new code and press the PRINT
switch, and the entered code is registered.

55

CRUM destination display
When this simulation is executed, the current setup of the CRUM destination stored in the machine is displayed.

46

19

γ

 table setup

When this simulation is executed, the currently set gamma table code number is displayed. Enter the code
number corresponding to your desired gamma table and press the PRINT switch, and the setup will be changed.

Code number

Setting

0

Stop at developer life over

1

Stop cancel at developer life over

Code number

Setting

00

No setup

01

BTA-A

02

BTA-B

03

BTA-C

Code number

γ

 table

1

Japan

2

EX Japan

AR-151E

3 – 1