AR-120E (serv.man11). AR120E-Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 17

3

Making copies

The single-sheet manual bypass can be used to feed standard paper, transparency film, labels,
and other special purpose papers measuring from A6 to A4 (3-1/2" x 5-1/2" to 8-1/2" x 14") and
in the weight range of 52 to 130 

g

/m

2

 (14 to 34.5 lbs.). (For paper weighing from 104 to 130 

g

/m

2

(28 to 34.5 lbs.), A4 (8-1/2" x 11") is the maximum size.)

Place the original face down on the original table. Align it with the original scale and
close the original cover.

The original image must be smaller than the paper or media for copying.
If the original image is bigger than the paper or media, this may cause smudges
on the edges of the copies.

Set the paper guides to the copy paper width. Insert a single sheet of copy paper (print
face down) into the feed slot of the manual bypass.
Copying will begin automatically.

●

Paper must be fed narrow side into the feed slot.

●

When copying onto transparency film, remove each copy promptly. Do not let
copies stack up.

              

Print face

Two-sided copying can be made on this copier using the manual bypass.

Example: The following two originals will be copied onto two sides of copy paper.

Face up

First original

Second original

Face up or face down

Face down