AM-400. General Product Specifications. (Taken from Service Manual) - Sharp Copying Equipment Specification (repair manual)

am-400 specification
Model
AM-400
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
76.56 KB
Type
PDF
Document
Specification
Brand
Device
Copying Equipment / General Product Specifications. (Taken from Service Manual)
File
am-400.pdf
Date

Read Sharp AM-400 Specification online

AM-400DE
1 – 3
[2] Specifications
1. Print specifications
2. Copy specifications
3. Fax specifications
4. Scanning specifications
5. General specifications
Printer type:
Laser
Toner cartridge yield*:
 (continuous printing, 5%
 page coverage, A4
 paper)
Initial starter cartridge (included
with machine): Approx. 1500 pages
Replacement cartridge AM-30DC:
Approx. 3000 pages
Drum cartridge yield*:
 (continuous printing, 5%
 page coverage, A4
 paper)
Initial starter cartridge (included
with machine): 20,000 pages (aver-
age)
Replacement cartridge AM-90DR:
20,000 pages (average)
PC print speed:
12 ppm (pages per minute)
Resolution:
600 x 600 dpi (dots per inch)
* The yields may vary depending on coverage and operating condi-
tions.
Copy speed:
12 cpm (copies per minute)
Copy quality settings:
Text, Photo
Copy resolution settings:
300 dpi, 600dpi
Enlargement/Reduction:
25% to 400%
Contrast settings:
5 levels
Halftone:
256 levels
Multiple copies:
Max. 99 copies per original
Maximum copy size:
Automatic dialing:
100 Speed Dial numbers
Modem speed:
33,600 bps with automatic fallback to
lower speeds (lowest speed 2400
bps)
Transmission time*:
Approx. 3 seconds
Communication method:
Super G3, G3
Compression scheme:
MMR, MR, MH
Applicable telephone line: Analog public switched telephone
network (TBR21)
Memory size*:
2 MB (approx. 125 average A4
pages)
* Based on Sharp Standard Chart at standard resolution, excluding
time for protocol signals (i.e., ITU-T phase C time only).
Resolution:
Horizontal: 8 dots/mm
Vertical: Standard: 3.85 lines/mm
 Fine/Halftone: 7.7 lines/mm
 Super fine: 15.4 lines/mm
Halftone:
256 levels
Reception modes:
FAX ONLY, EXT. TEL
Scanner type:
CIS (Contact Image Sensor)
Resolution:
300/600 x 300 dpi, 300/600 x 600 dpi
Black and white:
 300/600 x 300 dpi: 6 sec/page
 300/600 x 600 dpi: 6 sec/page
Color and grayscale:
 300/600 x 300 dpi: 22 sec/page
 300/600 x 600 dpi: 22 sec/page
Compatibility:
TWAIN, WIA
Grayscale:
256 levels
Color:
24-bit color
A4 size: 20 sheets max. (80 g/cm
2
)
Computer connection:
USB 2.0 or 1.1 port (USB 2.0 or 1.1
cable must be purchased separately)
Effective scanning width:
208 mm max.
Effective printing width:
202 mm max.
Display:
16-digit LCD display
Paper tray capacity:
 (A4-size plain paper)
250 sheets (80 g/cm
2
)
(At room temperature and normal
humidity)
Power requirements:
220 - 230 V AC, 50 Hz
(U.K., Eire: 230 V AC, 50 Hz)
Operating temperature:
10 - 30
°C
Humidity:
20 - 85% RH
Noise emission:
German Products and Equipment
Safety Law, Part 3: Noise emission:
The max. Acoustic Noise is 70 dB(A)
or less according to EN ISO7779.
Power consumption:
Idle: 9 W
Maximum: 870 W
Dimensions:
Width: 475 mm
Depth: 420 mm
Height: 370 mm
Weight:
Approx. 12.7 kg (including trays and
toner and drum cartridges)
* Based on Sharp Standard Chart at standard resolution, excluding
time for protocol signals (i.e., ITU-T phase C time only).
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement 
without prior notice. The performance specifications figures indicated are nominal values of production units. There may be some deviations from 
these values in individual units.
Trademark information
• Microsoft, Windows and Internet Explorer are trademarks of Microsoft Corporation in the
   U.S.A. and other countries.
Display

Download Sharp AM-400 Specification

Here you can read online and download Sharp AM-400 Specification in PDF. AM-400 specification will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AM-400 Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.