Read Sharp AM-400 (serv.man9) Service Manual online
AM-400DE
1 – 3
[2] Specifications
1. Print specifications
2. Copy specifications
3. Fax specifications
4. Scanning specifications
5. General specifications
Printer type:
Laser
Toner cartridge yield*:
(continuous printing, 5%
page coverage, A4
paper)
(continuous printing, 5%
page coverage, A4
paper)
Initial starter cartridge (included
with machine): Approx. 1500 pages
Replacement cartridge AM-30DC:
Approx. 3000 pages
with machine): Approx. 1500 pages
Replacement cartridge AM-30DC:
Approx. 3000 pages
Drum cartridge yield*:
(continuous printing, 5%
page coverage, A4
paper)
(continuous printing, 5%
page coverage, A4
paper)
Initial starter cartridge (included
with machine): 20,000 pages (aver-
age)
Replacement cartridge AM-90DR:
20,000 pages (average)
with machine): 20,000 pages (aver-
age)
Replacement cartridge AM-90DR:
20,000 pages (average)
PC print speed:
12 ppm (pages per minute)
Resolution:
600 x 600 dpi (dots per inch)
* The yields may vary depending on coverage and operating condi-
tions.
tions.
Copy speed:
12 cpm (copies per minute)
Copy quality settings:
Text, Photo
Copy resolution settings:
300 dpi, 600dpi
Enlargement/Reduction:
25% to 400%
Contrast settings:
5 levels
Halftone:
256 levels
Multiple copies:
Max. 99 copies per original
Maximum copy size:
Document glass: A4
Auto document feeder: A4
Auto document feeder: A4
Automatic dialing:
100 Speed Dial numbers
Modem speed:
33,600 bps with automatic fallback to
lower speeds (lowest speed 2400
bps)
lower speeds (lowest speed 2400
bps)
Transmission time*:
Approx. 3 seconds
Communication method:
Super G3, G3
Compression scheme:
MMR, MR, MH
Applicable telephone line: Analog public switched telephone
network (TBR21)
Memory size*:
2 MB (approx. 125 average A4
pages)
pages)
* Based on Sharp Standard Chart at standard resolution, excluding
time for protocol signals (i.e., ITU-T phase C time only).
time for protocol signals (i.e., ITU-T phase C time only).
Resolution:
Horizontal: 8 dots/mm
Vertical: Standard: 3.85 lines/mm
Fine/Halftone: 7.7 lines/mm
Super fine: 15.4 lines/mm
Vertical: Standard: 3.85 lines/mm
Fine/Halftone: 7.7 lines/mm
Super fine: 15.4 lines/mm
Halftone:
256 levels
Reception modes:
FAX ONLY, EXT. TEL
Scanner type:
CIS (Contact Image Sensor)
Resolution:
300/600 x 300 dpi, 300/600 x 600 dpi
Scan speed:
(TWAIN scanning using
the auto document feeder;
reading time only)
(TWAIN scanning using
the auto document feeder;
reading time only)
Black and white:
300/600 x 300 dpi: 6 sec/page
300/600 x 600 dpi: 6 sec/page
Color and grayscale:
300/600 x 300 dpi: 22 sec/page
300/600 x 600 dpi: 22 sec/page
300/600 x 300 dpi: 6 sec/page
300/600 x 600 dpi: 6 sec/page
Color and grayscale:
300/600 x 300 dpi: 22 sec/page
300/600 x 600 dpi: 22 sec/page
Compatibility:
TWAIN, WIA
Grayscale:
256 levels
Color:
24-bit color
Auto document feeder:
A4 size: 20 sheets max. (80 g/cm
2
)
Computer connection:
USB 2.0 or 1.1 port (USB 2.0 or 1.1
cable must be purchased separately)
cable must be purchased separately)
Effective scanning width:
208 mm max.
Effective printing width:
202 mm max.
Display:
16-digit LCD display
Paper tray capacity:
(A4-size plain paper)
(A4-size plain paper)
250 sheets (80 g/cm
2
)
(At room temperature and normal
humidity)
humidity)
Power requirements:
220 - 230 V AC, 50 Hz
(U.K., Eire: 230 V AC, 50 Hz)
(U.K., Eire: 230 V AC, 50 Hz)
Operating temperature:
10 - 30
°C
Humidity:
20 - 85% RH
Noise emission:
German Products and Equipment
Safety Law, Part 3: Noise emission:
The max. Acoustic Noise is 70 dB(A)
or less according to EN ISO7779.
Safety Law, Part 3: Noise emission:
The max. Acoustic Noise is 70 dB(A)
or less according to EN ISO7779.
Power consumption:
Idle: 9 W
Maximum: 870 W
Maximum: 870 W
Dimensions:
Width: 475 mm
Depth: 420 mm
Height: 370 mm
Depth: 420 mm
Height: 370 mm
Weight:
Approx. 12.7 kg (including trays and
toner and drum cartridges)
toner and drum cartridges)
* Based on Sharp Standard Chart at standard resolution, excluding
time for protocol signals (i.e., ITU-T phase C time only).
time for protocol signals (i.e., ITU-T phase C time only).
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specifications figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
without prior notice. The performance specifications figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Trademark information
• Microsoft, Windows and Internet Explorer are trademarks of Microsoft Corporation in the
U.S.A. and other countries.
U.S.A. and other countries.
Click on the first or last page to see other AM-400 (serv.man9) service manuals if exist.