AM-400 (serv.man12). AM-300 400 Quick Setup Guide. - Sharp Copying Equipment User Guide / Operation Manual

am-400 (serv.man12) user guide / operation manual
Model
AM-400 (serv.man12)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
427.66 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / AM-300 400 Quick Setup Guide.
File
am-400-sm12.pdf
Date

Read Sharp AM-400 (serv.man12) User Guide / Operation Manual online

AM-300/400 
QUICK SETUP GUIDE
AM-400 only: Connect the phone line cord 
to the TEL. LINE jack and a wall jack.
Italy: Use the provided adapter to connect the 
line cord to the wall socket.
1
7
Attach the trays.
3
Load paper.
Make sure you have the following items. If any 
are missing, contact your dealer or retailer.
Note: The shape of the line cord plug varies by 
country. An adapter (not shown) is provided in 
some countries.
1. Remove the output tray.
4
5
6
Install the toner cartridge and drum cartridge.
2. Remove the drum cartridge from its 
packaging.
4. Remove the toner cartridge from its 
packaging. Shake the cartridge side 
to side four or five times to distribute 
the toner evenly within the 
cartridge.
3. Insert the drum cartridge, 
sliding it along the guides.
5. Insert the toner cartridge, sliding it along 
the guides 
until it clicks into place
.
7. Press 
 to select
 “YES” and 
then press 
. (This resets 
the toner cartridge counter.)
8. Reset the drum cartridge counter:
a.Press 
 once and then 
 or 
 until “LIFE” appears in the 
display. 
b. Press 
 and then 
.
c. Press 
 repeatedly to exit.
MENU
Z
A
6. Close the front cover 
 and 
then the side cover 
.
PRINTED IN THAILAND  (TCADH3785XHZZ) 
Display:
1:YES, 2:NO
TONER EXCHANGED?
2. Insert a stack of paper 
into the tray, print side up.
1. Press 
. Open the side cover 
 and then the front cover 
.
Important: 
Pull the scanner release toward you to 
release the scanner lock.
Caution: Be sure to release the scanner lock  
before plugging in the power cord.
Plug the power cord into a standard, earthed 
power outlet.
Note: The power outlet must be installed 
near the equipment and must be easily 
accessible.
2
1
2
3
Caution!
Do not touch the fusing unit 
under the side cover after the 
machine has been in operation, 
as it may become very hot.
Grasp this handle to 
push the cartridge in
Press on the arrow 
mark to make sure 
the cartridge clicks 
into place
2
1
Toner 
cartridge
Telephone line 
cord 
(AM-400 
only)
Drum 
cartridge
CD-ROM
Setup 
Guide
Document 
feeder tray
Output tray
When the tray 
stops, lift the 
end slightly 
and push in.
3. Squeeze the sides of the paper 
guide and slide it to the slot for 
the length of paper loaded.
4. Replace the output tray.
TEL.
LINE
TEL.
SET
For detailed instructions 
on setting up and using the AM-300/400, see the 
online guide on the CD-ROM.
To open the guide, double-click the Manual folder on 
the CD-ROM, double-click English, and then double-
click Online Manual.pdf.
(Note: Acrobat Reader 5.05 or higher is required to 
view the manual.To install Version 5.05, double-click 
Acrobat ReaderEnglish, and then ar505enu.exe 
on the CD-ROM.)
 All company names and product names appearing in this 
setup guide are the trademarks of their respective owners.
English
AM-400 only: Set the date and time 
that appear in the fax mode display.
1. In the date and time display of fax mode 
(press 
 if needed to select fax 
mode), 
press  , , .
2. Enter a two-digit number for the day 
("01" to "31").
Example: the 5th   
 
To clear a mistake press 
.
3. Enter a 2-digit number for the month.
Example: February   
 
4. Enter the year (four digits)
Example: 
 
 
 
FAX
MENU
Z
 8
5. Enter a two-digit number for the hour 
(00 to 23) and a two-digit number for 
the minute (00 to 59).
Example: 9:25 
 
 
 
6. Press .
7. Press 
 repeatedly to exit.
ENTER
The stack should 
not be higher 
than this line
Note: The 
shape of the 
power plug 
varies by 
country
Note: The 
shape of the 
line cord plug 
varies by 
country.
English
Install the software on your computer. (The software 
allows the machine to be used as a printer and scanner.)
 9
1. Make sure that a USB cable is not connected 
to the machine and your computer. (The cable 
will be connected in Step 11.)
If a cable is connected and a Plug and Play window appears, close 
the window and disconnect the cable.
2. Insert the Sharp CD-ROM into your computer’s 
CD-ROM drive.
3. Windows
®
 XP: Click the start button, click My 
Computer, and double-click the CD-ROM icon.
Windows
®
 Me/2000: Double click My Computer on 
the desktop and double-click the CD-ROM icon.
4. Double-click the setup icon (
) in the CD-
ROM window.
5. If the Language Selection window appears, 
select the language that you wish to use and click 
Next (the language selections will vary depending 
on your country or region).
6. Follow the on-screen instructions.
When the Setup Type Selection window appears, select 
Standard to install all of the software components (this should 
normally be selected). If you only wish to install certain 
components, select Custom and then select the components 
that you wish to install.
In Windows
®
 2000/XP, if a warning message appears at any time 
regarding the Windows logo test or digital signature, be sure to click 
Continue Anyway or Yes.
7.
When the Finish window appears to indicate that the 
selected packages have been installed, click Close.
8.
If the installation was a Standard installation, the 
following window will appear. Click OK.
If you installed the MFP drivers using a Custom installation 
and did not install Sharpdesk, the following window will 
appear. Click OK and go to Step 11.
9.
The following window will appear. Click Yes to restart 
your computer.
10. The Search Setup Wizard will appear. Follow the 
on-screen instructions to create an index 
database for Sharpdesk.
11. Make sure that the machine’s power cord is not 
plugged in, and then connect the USB cable to the 
USB port on the machine and on your computer.
12. Plug in the machine’s power cord.
Windows
®
 XP: Follow Steps 13 through 16 to 
complete the installation of the software.
Windows
®
 2000: This completes the installation of the 
software.
Note: If a warning message regarding the Windows logo 
test appears (the warning may appear twice), click Yes 
each time the window appears. This will complete the 
installation of the software.
Windows
®
 Me: This completes the installation of the 
software.
Note:  In the power management settings in the Control 
Panel
System stand by must be set to Never.
Completing the installation on Windows
®
 XP
13. In Windows
®
 XP, the Found New Hardware 
Wizard will appear. Make sure that Install the 
software automatically (Recommended)
 is 
selected and click Next.
Note for Windows
®
 XP SP2: The first window of the 
wizard will ask you if the wizard can connect to Windows 
Update. Select No, not this time and click Next.
If a warning message appears regarding the Windows 
logo test, click Continue Anyway.
14.
When the wizard finishes installing the software, click 
Finish to close the wizard.
15. After a brief interval, the Found New Hardware 
Wizard will appear again. Make sure that Install 
the software automatically (Recommended)
 is 
selected and click Next.
If a warning message appears regarding the Windows 
logo test, click Continue Anyway.
16. When the wizard finishes installing the software, 
click Finish to close the wizard. This completes 
the installation of the software on Windows
®
 XP.
Note: A USB 2.0 or 1.1 cable is required to connect the 
machine to your computer. Please purchase this separately.
10
Configure Button Manager (one of the programs installed in the above step) as 
the program on your computer that handles scanner events from the machine.
Windows
®
 XP/Me
1. Click the start button, click Control Panel, and 
double-click Scanners and Cameras.
If Scanners and Cameras does not appear in Windows 
Me, click view all Control Panel options.
2. Right-click the SHARP AM-300/400 icon and 
select Properties.
3. The SHARP AM-300/400 Properties appear. 
Click on the Events tab.
4. Select SC1 from the Select an event list.
5. In the Actions field, select Start this program 
and then select Sharp Button Manager I from the 
list of programs. Click Apply.
6. Repeat Steps 4 and 5 for each of events SC2 
through SC6. When finished, click the OK button.
Windows
®
 2000
1. Click the Start button, point to Settings, and 
select Control Panel.
2. In the Control Panel,  double-click Scanners and 
Cameras.
3. Select SHARP AM-300/400 and click Properties.
4. Click the Events tab in the SHARP AM-300/400 
Properties.
5. Select SC1 from the Scanner events list.
6. In Send to this application, select Sharp 
Button Manager I.
If other applications appear in the list, make sure that 
none are selected.
7. Click the Apply button.
8. Repeat Steps 5 through 7 for each of events SC2 
through SC6. When finished, click the OK button.
This is a facsimile product operating in German, Austrian, Swiss, French, 
Italian, Swedish, Finnish, Norwegian, Danish, Spanish, Portuguese, 
Greek, Hungarian, Dutch and Belgian analogue public switched 
telephone networks which follow the TBR21 Standard.
Dies ist ein Faxprodukt für den Betrieb in deutschen, österreichischen, 
schweizerischen, französischen, finnischen, norwegischen, dänischen, 
spanischen, portugiesischen, griechischen, ungarischen, 
niederländischen und belgischen öffentlichen, analogen Telefonnetzen, 
die den TBR21-Standard verwenden.
Ce télécopieur fonctionne sur les réseaux téléphoniques publiques 
commutés et analogiques allemand, autrichien, suisse, français, italien, 
suédois, finnois, norvégien, danois, espagnol, portugais, grec, hongrois, 
hollandais et belge qui respectent la norme TBR21.
Questo apparecchio facsmile funziona sulle reti telefoniche commutate 
pubbliche tedesche, svizzere, austriache, francesi, italiane, svedesi, 
finlandesi, norvegesi, danesi, spagnole, portoghesi, greche, ungheresi, 
olandesi  e belghe che seguono lo standard TBR21.
Detta är en faxmaskin som fungerar tillsammans med tyska, österrikiska, 
schweiziska, franska, italienska, svenska, finska, norska, danska, 
spanska, portugisiska, grekiska, ungerska, holländska och belgiska 
analoga kopplade telefonnätverk som följer TBR21-standarden.
Tämä on faksilaite, joka toimii analogisissa julkisissa yleisissä 
valinnaisissa verkoissa, jotka noudattavat TBR21 standardia, seuraavissa 
maissa: Saksa, Itävalta, Sveitsi, Ranska, Italia, Ruotsi, Suomi, Norja, 
Tanska, Espanja, Portugali, Kreikka, Unkari,  Alankomaat ja Belgia.
Dette er et faksprodukt som kan brukes i offentlige telenett som følger 
TBR21-standarden i følgende land: Tyskland, Østerrike, Sveits, Frankrike, 
Italia, Sverige, Finland, Norge, Danmark, Spania, Portugal, Hellas, 
Ungarn, Nederland og Belgia.
Dette er et faxprodukt, der fungerer i tyske, østrigske, schweiziske, 
franske, italienske, svenske, finske, norske, danske, spanske, 
portugisiske, græske, ungarske, hollandske og belgiske analoge offentlig 
tilsluttede telefonnetværker, som følger TBR21 Standarden.
Este producto es un fax que funciona en las redes telefónicas públicas 
conmutadas (RTPC) analógicas de Alemania, Austria, Suiza, Francia, 
Italia, Suecia, Finlandia, Noruega, Dinamarca, España, Portugal, Grecia, 
Hungría, Países Bajos y Bélgica y que cumple la norma TBR21.
Este fax está em funcionamento em rede telefónicas fixas públicas 
alemãs, austríacas, suíças, francesas, italianas, suecas, finlandesas, 
norueguesas, dinamarquesas, espanholas, portuguesas, gregas, 
húngaras, holandesas e belgas, que cumpram com a Norma TBR21.
Αυτή είναι µια συσκευή φαξ που λειτουργεί σύµφωνα µε τα Γερµανικά, 
Αυστριακά, Ελβετικά, Γαλλικά, Ιταλικά, Σουηδικά, Φινλανδικά, Νορβηγικά, 
∆ανικά, Ισπανικά, Πορτογαλικά, Ελληνικά, Ουγγρικά, Ολλανδικά και 
Βελγικά αναλογικά δηµόσια τηλεφωνικά δίκτυα µεταγωγής που 
ακολουθούν το Πρότυπο TBR21.
Ez egy fax termék, amely német, osztrák, svájci, francia, olasz, svéd, finn, 
norvég, dán, spanyol, portugál, görög, magyar, holland és belga analóg 
telefonhálózatokban muködtetheto, amelyek megfelelnek a TBR21 
szabványnak.
Dit is een faxproduct dat werkt op het Duitse, Australische, Zwitserse, 
Franse, Italiaanse, Zweedse, Finse, Noorse, Deense, Spaanse, 
Portugese, Griekse, Hongaarse, Nederlandse en Belgische analoge 
openbaar geschakelde netwerk volgens de TBR21-standaard.
The Declaration of Conformity can be viewed at the following URL address.
Die Konformitätserklärung kann unter folgender URL-Adresse eingesehen werden.
Vous pouvez consulter la Déclaration de conformité sur Internet, à l’adresse ci-dessous.
La Dichiarazione di conformità può essere consultata all‘indirizzo URL riportato di 
seguito.
Överensstämmelsedeklarationen finns att läsa på följande URL-adress.
Yhdenmukaisuusvakuutus on nähtävissä seuraavassa URL-osoitteessa.
Samsvarserklæringen ("Declaration of Conformity") finner du på følgende URL-adresse.
Overensstemmelseserklæringen kan ses på følgende URL-adresse.
El documento de Declaración de conformidad puede consultarse en la siguiente direc-
ción URL.
A Declaração de Conformidade pode ser visualizada no seguinte endereço URL.
Προβολή της ∆ήλωσης Συµµόρφωσης µπορεί να γίνει στην ακόλουθη διεύθυνση URL.
A Megfelelosségi nyilatkozat megtekinthetik az alábbi URL címen.
De Verklaring van Overeenstemming kan worden nagelezen op het volgende URL-
adres.
http://www.sharp.de/doc/AM-400.pdf
AM-400 only:
An explanation regarding WEEE (information 
on disposal) is included in the online guide on 
the CD-ROM. Please read this information.
Page of 2
Display

Download Sharp AM-400 (serv.man12) User Guide / Operation Manual

Here you can read online and download Sharp AM-400 (serv.man12) User Guide / Operation Manual in PDF. AM-400 (serv.man12) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AM-400 (serv.man12) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.