AL-840 (serv.man26). AL800 840-Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 10

Read Sharp AL-840 (serv.man26) User Guide / Operation Manual online

11
Pr
inting
ENGLISH
2
PRINTING
PRINTING A PAGE
The printing method is described below. Read the description with the operation manual for the
application to be used.
Before you can use your printer, you must install the printer driver which has
been supplied with the printer. Once this software has been installed, you can
control the printing of your documents from the printer driver which appears
on your computer screen. See INSTALLING THE PRINTER DRIVER
SOFTWARE
 on page 4.
When using multiple printers, you must change the printer setting from the
control panel to change the printer to be used. This printer cannot be used
with other GDI printers and printers that use the Windows Printing System.
For details, see USING OTHER INSTALLED DRIVERS on page 20.
Executing printing
1
Ensure that paper of the desired size is loaded in the paper tray. (See the section on
LOADING COPY PAPER in the copier operation manual.)
To print onto special paper, feed it one sheet at a time.
2
Turn on the printer. The ready (
) indicator will light up.
3
Select the settings for printing such as the number of sets and paper type from the
application. See SETTING PRINT CONDITIONS FROM PRINTER DRIVER on page
12.
Before printing, ensure that the AL-800 series has been selected as the printer.
4
Print the file from your software application.
If copying is being performed when printing is initiated, copying will continue.
After copying is complete, printing will be executed when the clear (
) key is
pressed twice or approximately 60 seconds (auto clear time)* elapse.
* The auto clear time varies with a user program setting. See the copier
operation manual.
Preheat mode and auto power shut-off mode will be canceled when printing
is started.
4
Page of 25
Display

Click on the first or last page to see other AL-840 (serv.man26) service manuals if exist.