Read Sharp AL-800 (serv.man8) Service Manual online
S003/P001
Paper width detector
S003/P002
Paper set lever
S003/P003
Paper pressure plate
(1)
Remove the rear cabinet S001/P001 .
(2)
Remove the front upper cabinet S001/P002 .
(3)
Remove the left cabinet S001/P004 .
(4)
Pull and remove the paper width detector (actuator) (S003/
P001) on one side from the back of the rear cabinet.
P001) on one side from the back of the rear cabinet.
(5)
Cut the binding band, remove the connector and the screw, and
remove the paper width detector (switch) (S003/P001).
remove the paper width detector (switch) (S003/P001).
*
Troubles caused by improper work
1) Right/left void areas defective
2) Image position detective
3) Transfer roller dirt
(Copy dirt)
(Paper jam)
(Paper jam)
(6)
Remove the right cabinet S001/P003 .
(7)
Remove the screw, and remove the paper set lever (S003/
P002)and the paper pressure plate (S003/P003).
P002)and the paper pressure plate (S003/P003).
*
Troubles caused by improper work
1) Mis-feed
2) Paper jam
3) Paper skew
S003/P004
Paper feed roller clutch spring
S003/P005
Paper feed roller
S003/P006
Paper feed clutch sleeve A
S003/P007
Paper feed clutch sleeve B
S003/P008
Paper feed clutch lever
S003/P009
Paper separator
(1)
Remove the rear cabinet S001/P001 .
(2)
Remove the front upper cabinet S001/P002 .
(3)
Remove the right cabinet S001/P003 .
(4)
Remove the left cabinet S001/P004 .
(5)
Remove the document table glass S001/P007 .
(6)
Remove the fan motor unit S010/P001 .
(7)
Remove the MCU (PCU) PWB unit S009/Ua002 .
S003/P001
S003/P001
S003/P003
S003/P002
9 – 10
Click on the first or last page to see other AL-800 (serv.man8) service manuals if exist.