Read Sharp AL-800 (serv.man8) Service Manual online
*
Troubles caused by improper work
1) paper jam
(2)
Remove the paper exit detector (S007/Ua001/P005).
#1. Fit the boss direction and remove.
*
Troubles caused by improper work
1) Paper jam
(3)
Remove the screw, and remove the fusing temperature sensor
(S007/Ua001/P006).
(S007/Ua001/P006).
*
Note for assembly
Be careful not to mistake the installing direction of the fusing
temperature sensor.
temperature sensor.
*
Cleaning
Use absolute alcohol to clean the contact surface of the heat
roller.
roller.
*
Troubles caused by improper work
1) Fusing abnormality
2) Fusing temperature error (H2-00, H3-00, H4-00)
(4)
Remove the screw, and remove the heat roller (S007/Ua001/
P007) and the heater lamp (S007/Ua001/P008).
P007) and the heater lamp (S007/Ua001/P008).
*
Note for assembly
Insert a piece of paper between the separation pawl and the heat
roller to keep the separation pawl open in order to protect the heat
roller from damage.
roller to keep the separation pawl open in order to protect the heat
roller from damage.
*
Cleaning
Use absolute alcohol to clean the separation pawl.
(5)
Remove the separation pawl (S007/Ua001/P009).
(6)
Remove the screw, and remove the temperature fuse A (S007/
Ua001/P010) and the temperature fuse B (S007/Ua001/ P011).
Ua001/P010) and the temperature fuse B (S007/Ua001/ P011).
*
Cleaning
Use absolute alcohol to clean the contact section of the tempera-
ture fuse A which is in contact with the heat roller.
ture fuse A which is in contact with the heat roller.
Use absolute alcohol to clean the separation pawl.
*
Troubles caused by improper work
1) paper jam
S007/Ua001/P005
#1
S007/Ua001/P006/CLN
S007/Ua001/P008
S007/Ua001/P007/CLN
S007/Ua001/P011
S007/Ua001/P010/CLN
S007/Ua001/P007/CLN
9 – 27
Click on the first or last page to see other AL-800 (serv.man8) service manuals if exist.