Read Sharp AL-2031 Service Manual online
AL-2041 SPECIFICATIONS 2 - 2
：'10/Oct/20
1
3. Copy performance
*1: The first-copy time is measured after the power save indicator turns off following power on, using the document glass with the polygon rotat-
ing in the copy ready state and "Selection of copy start state" set to ON in the user programs (A4 (8-1/2" x 11"), paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient conditions such as temperature.
Fusing section
Fusing system
Heat roller system
Upper heat roller
Type
Teflon roller
Lower heat roller
Type
Silicon rubber roller
Heater lamp
Type
Halogen lamp
Voltage
120V / 220 - 240V
Power consumption
800W
Electrical section
Power source
Voltage
120V / 220 - 240V
Frequency
Common use for 50 and 60Hz
Power consumption
Max.
Less than 1000W
Average (during copying)
350Wh/H or less
Average (stand-by)
80Wh/H or less
Pre-heat mode
25Wh/H or less
Section, item
Details
Copy ratio
Document glass
Variable:
25% to 400% in 1% increments (total 376 steps)
25% to 400% in 1% increments (total 376 steps)
Fixed:
50%, 70%, 86%, 100%, 141%, 200%
(50%, 64%, 78%, 100%, 129%, 200%)
50%, 70%, 86%, 100%, 141%, 200%
(50%, 64%, 78%, 100%, 129%, 200%)
SPF
Variable:
50% to 200% in 1% increments (total 151 steps)
50% to 200% in 1% increments (total 151 steps)
Fixed:
50%, 70%, 86%, 100%, 141%, 200%
(50%, 64%, 78%, 100%, 129%, 200%)
50%, 70%, 86%, 100%, 141%, 200%
(50%, 64%, 78%, 100%, 129%, 200%)
Manual steps (Text, Photo)
5 steps
Copy speed (CPM)
First-copy time *1
(Approximately)
(Approximately)
8.0 seconds (When user program 24 is set to OFF)
10.7 seconds
(paper: A4 (8-1/2" x 11"), exposure mode: AUTO, copy ratio: 100%)
10.7 seconds
(paper: A4 (8-1/2" x 11"), exposure mode: AUTO, copy ratio: 100%)
AB system
A4 (Landscape)
Same size
20
AB system
B5 (Landscape)
Same size
20
Inch system
8-1/2" x 11" (Landscape)
Same size
20
Max. continuous copy quantity
99
Void
Void area
Leading edge
1 - 4mm
Trailing edge
4mm or less
Side edge void area
0.5mm or more (per side)
4.5mm or less (total of both sides)
Image loss
Leading edge
same size: 3.0mm or less (OC) / 4mm or less (SPF)
Enlarge: 1.5mm or less (OC) / 3mm or less (SPF)
Reduction (50%): 6.0mm or less (OC) / 8mm or less (SPF)
Warm-up time
- - -
Section, item
Details
1
1
1
1
Click on the first or last page to see other AL-2031 service manuals if exist.