AL-2021. Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 21

AL-2041  UNPACKING AND INSTALLATION  5 - 4

Check the following hardware and software requirements in order to
install the software.

*1: The machine’s USB 2.0 port will transfer data at the speed

specified by the USB 2.0 (Hi-Speed) standard only if the
Microsoft USB 2.0 driver is preinstalled in the computer, or if the
USB 2.0 driver for Windows 2000 Professional/XP/Vista that
Microsoft provides through "Windows Update" is installed.

*2: Compatible with models preinstalled with Windows 2000 Pro-

fessional, Windows XP Professional, Windows XP Home Edi-
tion, Windows Vista, or Windows 7, and which are equipped
standard with a USB interface.

*3: • The machine does not support printing from a Macintosh

environment.

• Administrator's rights are required to install the software

using the installer.

*4: Sharpdesk cannot be installed.

1) The USB cable must not be connected to the machine. 

Make sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. 
If this happens, click the "Cancel" button to close the window
and disconnect the cable.

Note: The cable will be connected in step 13).

2) Insert the Software CD-ROM into your computer's CD-ROM

drive.

3) Click the "Start" button, click "Computer", and then double-click

the CD-ROM icon (

).

• In Windows XP, click the "start" button, click "My Computer",

and then double-click the CD-ROM icon.

• In Windows 2000, double-click "My Computer", and then dou-

ble-click the CD-ROM icon.

4) Double-click the "Setup" icon (

).

• In Windows 7, if a message screen appears asking you for

confirmation, click "Yes".

• In Windows Vista, if a message screen appears asking you

for confirmation, click "Allow".

5) The "SOFTWARE LICENSE" window will appear. Make sure

that you understand the contents of the software license, and
then click the "Yes" button.

Note: You can show the "SOFTWARE LICENSE" in a different

language by selecting the desired language from the
language menu. To install the software in the selected
language, continue the installation with that language
selected.

6) Read the "Readme First" in the "Welcome" window and then

click the "Next" button.

7) To install all of the software, click the "Standard" button and go

to step 12).
To install particular packages, click the "Custom" button and go
to next step.

8) Click the "MFP Driver" button.

Click the "Display Readme" button to show information on
packages that are selected.

9) Select "Connected to this computer" and click the "Next" button.

Follow the on-screen instructions.

Caution:

• If you are using Windows Vista/7 and a security warning win-

dow appears, be sure to click "Install this driver software any-
way".

• If you are running Windows 2000/XP and a warning message

appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".

10) You will return to the window of step 8). If you wish to install But-

ton Manager or Sharpdesk, click the "Utility Software" button.
If you do not wish to install the Utility Software, click the "Close"
button and go to step 12).

Note: After the installation, a message prompting you to restart

your computer may appear. In this case, click the "Yes"
button to restart your computer.

Computer 
type

IBM PC/AT or compatible computer equipped 
with a USB 2.0*

1

/1.1*

2

Operating 
system*

3

Windows 2000 Professional*

4

, Windows XP, 

Windows Vista, Windows 7

Other 
hardware 
requirements

An environment on which any of the operating 
systems listed above can fully operate