AL-2020 (serv.man3). Revised Parts Guide - Sharp Copying Equipment Parts Guide (repair manual). Page 2

DEFINITION

Rank A : Maintenance parts, and consumable parts which are not included in but closely related to maintenance parts
Rank B : Performance/function parts (sensors, clutches, and other electrical parts), consumable parts
Rank E : Unit parts including PWB
Rank D : Preparation parts (External fitting, packing, parts packed together)
Rank C : Parts other than the above (excluding sub components of PWB)

Because parts marked with "!" is indispensable for the machine safety maintenance and operation, it must be replaced with

the parts specific to the product specification.

F

Other than this Parts Guide, please refer to documents Service Manual(including Circuit Diagram)of this model.

F

Please use the 13 digit code described in the right hand corner of front cover of the document, when you place an order.

F

For U.S. only-Use order codes provided in advertising literature. Do not order from parts department.

[NOTE]

*

 These parts are supplied by SMF 

Note for use of the revised Parts Guide

Interchangeability of parts is expressed by No1~6 as shown in the table below.

<Interchangeability>

1

Interchangeable.

2

Current type can be used in place of new type.

New type cannot be used in place of current type.

3

Current type cannot be used in place of new type.

New type can be used in place of current type.

4

Not interchangeable.

5

Interchangeable if replaced with same types of releted parts in use.

6

Others.

<Change of Division>

New & Addition
Change
Abolition
Q'uantity (increase)  Other
Q'uantity (decrease)
Correction

<Effective Time>

R / C

Running Change

Running Change of Effective Time is expressed as R/C.

New & Addition, Change, Abolition, and Quantity change are expressed with the marks shown in  the

table below.