Read Sharp AL-1644 (serv.man16) User Guide / Operation Manual online
5
INSTALLING THE SOFTWARE
7
The files required for installation of
the MFP driver are copied (if "MFP
Driver" was selected in Step 5).
the MFP driver are copied (if "MFP
Driver" was selected in Step 5).
Follow the on-screen instructions.
When you are asked how the printer is connected,
select "Connected to this computer" and click the
"Next" button.
select "Connected to this computer" and click the
"Next" button.
When "The MFP driver installation is complete."
appears, click the "OK" button.
The Button Manager installer will start.
appears, click the "OK" button.
The Button Manager installer will start.
8
Begin the installation of Button
Manager (if "Button Manager" was
selected in Step 5).
Manager (if "Button Manager" was
selected in Step 5).
Follow the on-screen instructions.
Click the "Finish" button when the message
informs you that setup is successful.
The Sharpdesk installer will start.
Click the "Finish" button when the message
informs you that setup is successful.
The Sharpdesk installer will start.
9
Begin the installation of Sharpdesk (if
"Sharpdesk" was selected in Step 5).
"Sharpdesk" was selected in Step 5).
Follow the on-screen instructions.
Click the "Finish" button when the message
informs you that Setup is complete.
Click the "Finish" button when the message
informs you that Setup is complete.
10
When the "Finish" screen appears,
click the "Close" button.
click the "Close" button.
When "Now connect the MFP interface cable to
the PC." appears, click the "OK" button.
the PC." appears, click the "OK" button.
11
Connect the interface cable to the
machine and your computer (p. 10).
machine and your computer (p. 10).
• If you are using a USB cable, make sure the
machine's power is turned on and then connect
the cable.
the cable.
• If you are using a parallel cable, turn off the
power of the machine and your computer,
connect the cable, turn on the power of the
machine, and then turn on your computer.
connect the cable, turn on the power of the
machine, and then turn on your computer.
Windows will detect the machine and the Plug
and Play screen will appear.
If you are using Windows XP with a parallel
cable, go to step 13.
and Play screen will appear.
If you are using Windows XP with a parallel
cable, go to step 13.
12
Begin installation of the scanner
driver. (Only when using a USB cable.)
driver. (Only when using a USB cable.)
"SHARP AL-XXXX" will appear in the "Found New
Hardware Wizard" dialog box. Select "Install the
software automatically (Recommended)", click the
"Next" button, and follow the on-screen instructions.
Hardware Wizard" dialog box. Select "Install the
software automatically (Recommended)", click the
"Next" button, and follow the on-screen instructions.
13
Begin installation of the printer driver.
"SHARP AL-XXXX" will appear in the "Found New
Hardware Wizard" dialog box. Select "Install the
software automatically (Recommended)" and click
the "Next" button. Follow the on-screen instructions.
Hardware Wizard" dialog box. Select "Install the
software automatically (Recommended)" and click
the "Next" button. Follow the on-screen instructions.
This completes the installation of the software.
• If you installed the MFP driver, configure the printer
driver settings as explained in "CONFIGURING THE
PRINTER DRIVER" (p. 11).
PRINTER DRIVER" (p. 11).
• If you installed Button Manager, set up Button Manager as
explained in "SETTING UP BUTTON MANAGER" (p. 12).
If the following screen appears while the files are
being copied (the message may appear more
than once), click the "Continue Anyway" button.
being copied (the message may appear more
than once), click the "Continue Anyway" button.
After the installation, a message prompting
you to restart your computer may appear. In
this case, click the "Yes" button to restart your
computer.
you to restart your computer may appear. In
this case, click the "Yes" button to restart your
computer.
Caution
Note
If a warning window appears regarding the
"Windows logo test", be sure to click the
"Continue Anyway" button.
"Windows logo test", be sure to click the
"Continue Anyway" button.
If a warning window appears regarding the
"Windows logo test", be sure to click the
"Continue Anyway" button.
"Windows logo test", be sure to click the
"Continue Anyway" button.
Caution
Caution
!install_ar160205.book 5 ページ ２００３年１０月９日 木曜日 午後４時４８分
Click on the first or last page to see other AL-1644 (serv.man16) service manuals if exist.