AL-1622 (serv.man25). Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 14

Read Sharp AL-1622 (serv.man25) User Guide / Operation Manual online

12
GETTING ST
AR
TED
Set-up
SET-UP
Pressure
plate lock
Screw
6
Store the pressure plate lock which has been removed
in step 5 and the screw which has been removed in
step 2 in the front of the paper tray.
To store the pressure plate lock, rotate the lock to fix it on the
relevant location.
For AL-1622, follow steps 4 to 6 for both the upper and lower trays
except for storage of the screw.
7
Ensure that the power switch of the copier is in the OFF
position. Plug the power cord into the nearest outlet.
If you use the copier in a country other than the
country where the copier was purchased, you will
need to make sure that your local power supply is
compatible with your model. If you plug the copier
into an incompatible power supply, irreparable
damage to the copier will result.
Only insert the power cord into a properly grounded
wall socket.
Do not use extension cords or power strips.
Connect the copier to a power outlet which is not used
for other electric appliances. If a lighting fixture is
connected to the same outlet, the light may flicker.
8
Turn the power switch on.
9
Load copy paper.
When loading copy paper for the first time, be sure to turn the power
switch on in advance.
For loading copy paper, see steps 2 to 4 of LOADING COPY
PAPER on page 13. If you use copy paper other than A4 (default
size), see pages 14 and 15.
Power on
Page of 80
Display

Click on the first or last page to see other AL-1622 (serv.man25) service manuals if exist.