Read Sharp AL-1622 (serv.man20) Service Manual online
AL-1611/AL-1622
UNPACKING AND INSTALLATION
5 – 1
[ 5 ] UNPACKING AND INSTALLATION
1. CHECKING PACKED COMPONENTS AND
ACCESSORIES
Open the carton and check to ensure that the following componets and
accessories are included.
accessories are included.
Note:
• If anything is not included or is damaged, contact your authorised
service representative.
• Save the carton and packing materials. These can be re-used for
transporting the machine, should it be necessary.
2. UNPAKING PROCEDURE
Be sure to hold the handles on both sides of the copier by two persons
to unpack the copier and carry it to the installation location.
to unpack the copier and carry it to the installation location.
3. INSTALLING PROCEDURE
1) Remove all pieces of tape. Then open the original cover and
remove the protective material.
2) Use a coin (or suitable object) to remove the screw.
• Store the screw in the paper tray because it will be used if the copier
has to be moved. (Refer to the description in the following.)
3) Ensure that the bypass tray is open. Raise the side coverrelease
handle and pull out the side cover until it stops.
4) Push gently on both sides of the front cover to open the cover.
Copier
TD cartridge
Operation
manual
manual
Power cord
Drum cartridge
(installed in copier)
Click on the first or last page to see other AL-1622 (serv.man20) service manuals if exist.