Read Sharp AL-1611 (serv.man24) User Guide / Operation Manual online
71
MATERIAL SAFETY DATA SHEET
Date Revised: Jun.28. 2002
Date Issued: Oct.18.2001
MSDS NO. F-30841
Date Issued: Oct.18.2001
MSDS NO. F-30841
4. FIRST-AID MEASURES
Route(s) of Entry :
Inhalation?
Skin?
Ingestion?
No
No
Possible but very unusual.
Inhalation
: Remove to fresh air. If symptoms occur, consult medical personnel.
Skin Contact : Wash with soap and water for 15 minutes or until particle is removed.
If irritation does occur, consult medical personnel.
Eye Contact
: Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical
personnel.
Ingestion
: Rinse with water and drink several glasses of water. If irritation or discomfort does occur,
consult medical personnel.
5. FIRE -FIGHTING MEASURES
Extinguishing Media : water, CO
2
, foam and dry chemicals
Special Fire fighting Procedures : None
Fire and Explosion Hazards : Like most finely divided organic powders, it may form an explosive
Fire and Explosion Hazards : Like most finely divided organic powders, it may form an explosive
mixture.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
: None
Environmental Precautions : None
Methods for Cleaning Up : Wipe off with paper or cloth. DO not use vacuum cleaner when a large
Methods for Cleaning Up : Wipe off with paper or cloth. DO not use vacuum cleaner when a large
amount is released. It, like most finely divided organic powders, is capable
of creating a dust explosion.
of creating a dust explosion.
7. HANDLING AND STORAGE
Handling
Technical Measures
: None
Precautions
: None
Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or
during long term exposure, as with any non-toxic dust. Try not to disperse the
particles.
particles.
Storage
Technical Measures
: None
Storage Conditions
: Keep container closed and Store in a cool and dry place.
Keep out of the reach of children.
Incompatible Products : None
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Engineering Measures
Ventilation
: None required with intended use.
Exposure limit values
OSHA-PEL (USA)
: 15mg/m³ (Total Dust) , 5mg/m³ (Respirable Dust)
ACGIH-TLV (USA)
: 10mg/m³ (Total Dust) , 3mg/m³ (Respirable Dust)
Personal Protective Equipment
Respiratory Protection : None required when used as intended in Sharp equipment.
Hand Protection
Hand Protection
: None required when used as intended in Sharp equipment.
Eye Protection
: None required when used as intended in Sharp equipment.
Skin Protection
: None required when used as intended in Sharp equipment.
Other Protective equipment : Use of a dust mask and goggles are recommended when handling a
large quantity of toner or during long term exposure, as with any non-
toxic dust.
toxic dust.
Page: 2/4
Click on the first or last page to see other AL-1611 (serv.man24) service manuals if exist.