Read Sharp AL-1566 (serv.man40) User Guide / Operation Manual online
USER SETTINGS
66
9
AE/TEXT
RESOLUTION
RESOLUTION
1: 300dpi
2: 600dpi
2: 600dpi
• The copy resolution in auto
and text mode is normally 300
dpi. If high-quality copies are
preferred, use this setting to
change the resolution to 600
dpi.
dpi. If high-quality copies are
preferred, use this setting to
change the resolution to 600
dpi.
10
2-SIDED COPY
MODE
MODE
1: HI-SPEED
2: NORMAL
2: NORMAL
• If the memory fills up when
two-sided copying is
performed, "NORMAL" can be
selected to make copying
possible. However,
"NORMAL" results in a slower
copying speed. Normally "HI-
SPEED" is selected to enable
fast two-sided copying.
performed, "NORMAL" can be
selected to make copying
possible. However,
"NORMAL" results in a slower
copying speed. Normally "HI-
SPEED" is selected to enable
fast two-sided copying.
11
MARGIN WIDTH
1: 5 mm
2: 10 mm
3: 15 mm
4: 20 mm
2: 10 mm
3: 15 mm
4: 20 mm
• Use this setting to set the
margin width.
12
MEM. FOR
PRINTER
PRINTER
1: 30%
2: 40%
3: 50%
4: 60%
5: 70%
2: 40%
3: 50%
4: 60%
5: 70%
• Use this to change the
proportion of machine
memory used for printer
mode.
memory used for printer
mode.
13
AUTO KEY
REPEAT
REPEAT
1: ON
2: OFF
2: OFF
• Use this setting to select
whether or not holding down a
key causes repeated input of
the key. For keys that
normally cause a set value to
increase when held down (for
example, holding down the
[
key causes repeated input of
the key. For keys that
normally cause a set value to
increase when held down (for
example, holding down the
[
] key (
) or [
] key
(
)), this program can be
used to have the set value not
change when the key is held
down.
change when the key is held
down.
14
KEY PRESS TIME
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
• Use this setting to select how
long a key must be pressed
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
15
KEY TOUCH
SOUND
SOUND
1: LOW
2: HIGH
3: OFF
2: HIGH
3: OFF
• This sets the volume of beep
signals. (p.70)
Program
number
Program name
Setting codes
(factory default
(factory default
setting appears
in bold)
Explanation
Click on the first or last page to see other AL-1566 (serv.man40) service manuals if exist.