Read Sharp AL-1530 (serv.man41) Technical Bulletin online
DCE061
Sharp Electronics (UK) Ltd., Technical Services Group
Inverter PWB
Harness treatment of lamp
*Procedure after replacement
Lamp
Positioning of lamp
Front side:
Lamp
Positioning of lamp
Front side:
*Align the parting line on the rubber holder with the
marks on the claw edges.
Rear side:
*Fit the hook of main body holder hook into that of
rubber holder fixer.
marks on the claw edges.
Rear side:
*Fit the hook of main body holder hook into that of
rubber holder fixer.
*Hang the harness on the 3 hooks in the top side and
the 3 hooks on the back side securely so that it does not
float or come off.
*Connect the connector to the output connector of the
inverter.
Inverter PWB
the 3 hooks on the back side securely so that it does not
float or come off.
*Connect the connector to the output connector of the
inverter.
Inverter PWB
*Fix the inverter PWB to the main body with 2 screws
securely.
Mounting the copy lamp unit on the main body
1) Connect the harness from the main body to the
securely.
Mounting the copy lamp unit on the main body
1) Connect the harness from the main body to the
lamp unit. After fixing the lamp unit to the main
body, hang the wire on the lamp unit.
body, hang the wire on the lamp unit.
Click on the first or last page to see other AL-1530 (serv.man41) service manuals if exist.