Read Sharp AL-1530 (serv.man11) User Guide / Operation Manual online
9
1
Getting started
INSTALLING THE OPTIONAL PRINTER UPGRADE KIT
Connecting the power cord
1
Ensure that the power switch of the copier is in the OFF position. Insert the removed
power cord into the power cord socket at the rear of the copier.
power cord into the power cord socket at the rear of the copier.
CONNECTING THE INTERFACE CABLE
To use an AL-1000 series machine as a laser printer, connect it to the parallel interface cable.
●
Use the supplied parallel interface cable.
●
For specifications of the parallel interface, see page 31.
1
Check that the power switches of both the printer and the computer are in the OFF
position.
position.
2
Plug the parallel interface cable into the printer interface connector. Fasten the two
bail clips at the side of the printer connector to hold the interface connector in place.
bail clips at the side of the printer connector to hold the interface connector in place.
3
Plug the other end of the cable into the parallel interface connector on your computer.
(Refer to your computer manual for details.)
(Refer to your computer manual for details.)
Bail clip
Interface connector
Parallel interface connector
Cable
The printer sends and receives data bi-directionally and at high speed. Some
switch boxes and pass-through devices cannot support high-speed, bi-
directional transfer of data, and using them may cause printing errors.
switch boxes and pass-through devices cannot support high-speed, bi-
directional transfer of data, and using them may cause printing errors.
Click on the first or last page to see other AL-1530 (serv.man11) service manuals if exist.