AL-1456 (serv.man6). Unpacking and installation - Sharp Copying Equipment Service Manual (repair manual). Page 6

AL-1555 UNPACKING AND INSTALLATION 5 - 6

12) Begin installation of the printer driver.

1. "SHARP AL-xxxx" (where xxxx is the model name of your

MFP) will appear in the "Found New Hardware Wizard" dialog
box. Select "Install the software automatically (Recom-
mended)" and click the "Next" button.

2. The "Hardware Installation" dialog box will appear. Click the

"Continue Anyway" button.

3. When installation of the driver is completed, click the "Finish"

button to finish the printer driver installation.

You have completed the installation of all the software.

Before starting the installation, make sure the USB interface cable is
not connected to the MFP.

1) Insert the supplied CD-ROM into your CD-ROM drive.

2) Double-click "My Computer", and then double-click the CD-ROM

icon.

• When any of "Hardware Found", or "Found New Hardware Wiz-

ard" messages appear during the software installation, be sure
to click the "Cancel" button.

3) Double-click the "Setup" icon.

• If the language selection screen appears after you double click

the "Setup" icon, select the language you wish to use and click
the "Next" button. (Normally, the correct language is selected
automatically.)

4) Select the software packages to be installed, and then click the

"Next" button.

The software packages with checkmark on the list on the screen
will be installed. Click the "Display README" button to show the
information on the selected package. 

• If the following screen appears, click the "OK" button. Review the

contents in "BEFORE INSTALLATION", and then select the
appropriate driver software packages to be installed.

5) Review the software packages to be installed on the screen, and

then click the "Start" button.

The software packages to be installed will be displayed on the
screen. If inappropriate packages are displayed, click the "Back"
button to select appropriate packages again.

6) Copying files for MFP driver installation.

1. After confirming the message in the "Welcome" window, click

the "Next" button.

2. A dialog box appears asking you to verify that the interface

cable is not connected to the MFP. Make sure that the interface
cable is not connected and click the "Next" button.

3. Click the "Next" button in the dialog box showing the files to be

copied for installation of the MFP driver.

The setup program will start to copy the files.

In Windows 2000, if the following screen appears while the files
are being copied (the message may appear more than once),
click "Yes" in Windows 2000.

4. The following screen appears when all of the files for the USB

interface connection have been copied. If you are not using a
parallel interface cable for connection to the MFP, please click
the "No" button.

5. When the "The MFP driver installation is complete." dialog box

appears, click the "OK" button.

The Button Manager installer will start.

7) Begin installation of the Button Manager (This step will start if it was

selected in step 4).

1. After confirming the message in the "Welcome" window, click

the "Next" button.

2. Read the message in the "Please read the following informa-

tion." window, and then click the "Next" button.

3. When a message appears that lets you specify the location for

the software to be installed, click the "Next" button.

4. If the program displays, "Do you want to add Button Manager to

Startup program?", check "Yes" and click the "OK" button.

The setup program will start to copy the files.

5. Click the "Finish" button when the message to inform you of the

completion of the installation appears.

The Sharpdesk installer will start.

8) Begin installation of the Sharpdesk (This step will start if it was

selected in step 4).

1. After confirming the message in the "Welcome to Sharpdesk

installation" window, click the "Next" button.

2. Read the message in the "Information" window, and then click

the "Next" button.

3. When the "Choose Destination Location" window appears, click

the "Next" button.

4. When the "Select Program Folder" window appears, click the

"Next" button.

The setup program will start to copy the files.

If the dialog box asking "If you have TIFF files saved using
Photo-Shop or Imaging for Windows you should hit Skip"
appears.  Answer the question to continue the Sharpdesk instal-
lation.

5. Click the "Finish" button when the message to inform you of the

completion of the installation appears.

9) Click the "Close" button when the message to inform you of the

completion of the installation appears. When the "Now connect the
MFP interface cable to the PC. This will finalize the drivers installa-
tion and settings." dialog box appears, click the "OK" button.