AL-1456 (serv.man6). Unpacking and installation - Sharp Copying Equipment Service Manual (repair manual). Page 5

AL-1555 UNPACKING AND INSTALLATION 5 - 5

• If you are using the parallel interface connection, do not select

the Button Manager checkbox because this feature is not sup-
ported with the parallel interface.

• If the following screen appears, click the "OK" button. Review the

contents in "BEFORE INSTALLATION", and then select only
appropriate the software packages to be installed.

5) Review the software packages to be installed on the screen, and

then click the "Start" button.

The software packages to be installed will be displayed on the
screen. If inappropriate packages are displayed, click the "Back"
button to select appropriate packages again.

6) Copying files for MFP driver installation and parallel interface setup

(This step will start if it was selected in step 4).

1. After confirming the message in the "Welcome" window, click

the "Next" button.

2. A dialog box appears asking you to verify that the USB or paral-

lel interface cable is not connected to the MFP. Make sure that
the interface cable is not connected and click the "Next" button.

3. Click the "Next" button in the dialog box to install the MFP driver

or Cancel to quit the installation.

The setup program will start to copy the files.
If the following screen appears while the files are being copied
(the message may appear more than once), click "Continue
Anyway". 

4. When the "The MFP driver installation is complete." dialog box

appears, click the "OK" button.

The Button Manager installer will start.

7) Begin installation of the Button Manager (This step will start if it was

selected in step 4).

1. After confirming the message in the "Welcome" window, click

the "Next" button.

2. Read the message in the "Please read the following informa-

tion." window, and then click the "Next" button.

3. When a message appears that lets you specify the location for

the software to be installed, click the "Next" button.

4. If the program displays, "Do you want the Button Manager

added to Windows Startup?", check "Yes" and click the "OK"
button.

The setup program will start to copy the files.

5. Click the "Finish" button when the message informs you that

setup is successful.

The Sharpdesk installer will start.

8) Begin installation of the Sharpdesk (This step will start if it was

selected in step 4).

1. After confirming the message in the "Welcome to Sharpdesk

installation" window, click the "Next" button.

2. Read the message in the "Information" window, and then click

the "Next" button.

3. When the "Choose Destination Location" window appears, click

the "Next" button.

4. When the "Select Program Folder" window appears, click the

"Next" button.

The setup program will start to copy the files.
If the dialog box asking "If you have TIFF files saved using
Photo-Shop or Imaging for Windows you should hit Skip"
appears. Answer the question to continue the Sharpdesk instal-
lation.

5. Click the "Finish" button when the message informs you that

Setup is complete.

9) Click the "Close" button when the message informs you that "Setup

has finished". When the "Now connect the MFP interface cable to
the PC" dialog box appears, click the "OK" button.

• After the installation, a message to restart your computer may be

displayed. In this case, click the "Yes" button to restart your com-
puter.

• For parallel interface connection ensure that your computer and

MFP are turned off before connecting the cable.

10) Connect the USB interface cable or parallel interface cable (see

page 5-8).

Windows will detect the MFP and the Plug and Play screen will
appear. If you are using Windows XP with the parallel interface, go
to step 12.

11) Begin installation of the scanner driver.

1. "SHARP AL-xxxx" (where xxxx is the model name of your

MFP) will appear in the "Found New Hardware Wizard" dialog
box. Select "Install the software automatically (Recom-
mended)" and click the "Next" button.

2. The "Install hardware" dialog box will appear. Click the "Con-

tinue Anyway" button.

3. When installation of the driver is completed, click the "Finish"

button to finish the scanner driver installation.