AL-1456 (serv.man30). Sect. 2 Setting Up the Unit - Sharp Copying Equipment User Guide / Operation Manual. Page 7

When the unit power is on, the operation panel will revert to the initial settings when 
the time set with the "Auto clear time" setting (p.54) elapses after a copy or scanner 
job is finished, or when the clear (

) key is pressed twice.

The initial settings of the operation panel are shown below.

When copying is begun in this state, the settings in the following table are used.

If not used for a certain period of time, the unit will automatically enter auto power 
shut-off mode (p.54) in order to minimize power consumption. In cases where the 
machine will not be used for a long time, turn off the power switch and remove the 
power cord from the outlet.

Copy quantity

1 copy

Exposure adjustment

Auto

Zoom

100%

Original to copy

The "Original to copy" indicator does 
not illuminate. (One-sided copying 
only)

Tray

Paper tray 1

AL-1555

A5

A4

A4

B5

A4

A5

141

86

70

"0" is displayed in the display.