AL-1456 (serv.man28). Sect. 4 Installing the Software - Sharp Copying Equipment User Guide / Operation Manual. Page 27

Read Sharp AL-1456 (serv.man28) User Guide / Operation Manual online

45
4
CONNECTING THE INTERFACE CABLE
This unit includes both USB and parallel interface connectors.
Interface cables for connecting the unit to your computer are not included with this 
unit. Please purchase the appropriate cable for your computer.
Connecting the USB interface cable
1
Obtain a shielded USB interface cable.
2
Insert the cable into the USB interface 
connector located on the rear of the 
unit.
3
Insert the other end of the cable into the interface connector of 
your computer, or the USB hub connected to your computer.
Connecting the parallel interface cable
1
Obtain an IEEE1284 shielded parallel interface cable.
2
Ensure that your computer and unit are turned off.
3
Insert the cable into the parallel 
interface connector located on the 
rear of the unit, and fasten with 
clasps.
4
Insert the other end of the cable into 
the interface connector of your computer.
•
If you intend to use the unit as a scanner, it must be connected 
to your computer with a USB interface cable. The scanner 
function cannot be used if the unit is connected with a parallel 
cable.
•
USB is available with a PC/AT compatible computer that was 
originally equipped with USB and had Windows 98, Windows Me, 
Windows 2000 Professional, Windows XP Professional or Windows 
XP Home Edition preinstalled.
•
Do not connect the interface cable before installing the MFP driver. 
The interface cable should be connected during installation of the 
MFP driver. (p.21)
Page of 27
Display

Download Sharp AL-1456 (serv.man28) User Guide / Operation Manual

Found More:

AL-1456 (serv.man28) Service Manuals

Preview DownloadPagesSize
AL-1456 (serv.man5) External views and internal structures Service Manual 7 336 KB
AL-1456 (serv.man6) Unpacking and installation Service Manual 9 609 KB
AL-1456 (serv.man7) Copy process Service Manual 4 114 KB
AL-1456 (serv.man8) Operational descriptions Service Manual 9 408 KB
AL-1456 (serv.man9) Disassembly and assembly part 1 Service Manual 16 1.79 MB
AL-1456 (serv.man10) Disassembly and assembly part 2 Service Manual 15 1.59 MB
AL-1456 (serv.man11) Adjustments Service Manual 7 205 KB
AL-1456 (serv.man12) Simulation and trouble codes Service Manual 15 135 KB
AL-1456 (serv.man13) User programs Service Manual 2 45 KB
AL-1456 (serv.man14) Electrical section Service Manual 13 293 KB
AL-1456 (serv.man15) Circuit diagram Service Manual 21 1.09 MB
AL-1456 (serv.man21) Back Cover User Guide / Operation Manual 2 53.62 KB
AL-1456 (serv.man29) Sect. 3 Loading Paper User Guide / Operation Manual 5 143.83 KB
AL-1456 (serv.man22) Media Warranty Safety Data Sheets User Guide / Operation Manual 9 3.42 MB
AL-1456 (serv.man23) Sect. 9 Appendix User Guide / Operation Manual 4 51.05 KB
AL-1456 (serv.man24) Sect. 8 Troubleshooting User Guide / Operation Manual 7 210.98 KB
AL-1456 (serv.man25) Sect. 7 Maintenance User Guide / Operation Manual 4 151.23 KB
AL-1456 (serv.man26) Sect. 6 Special Functions User Guide / Operation Manual 5 137.04 KB
AL-1456 (serv.man27) Sect. 5 Making Copies User Guide / Operation Manual 6 184.72 KB
AL-1456 (serv.man20) Online Manual User Guide / Operation Manual 37 1.65 MB
AL-1456 (serv.man30) Sect. 2 Setting Up the Unit User Guide / Operation Manual 7 303.27 KB
AL-1456 (serv.man31) Sect. 1 Introduction User Guide / Operation Manual 3 199.18 KB
AL-1456 (serv.man32) Front Cover, Cautions Contents User Guide / Operation Manual 5 116.79 KB
AL-1456 (serv.man56) Win2K GDI Driver (v2.8A.006) with WHQL Drivers 772.21 KB
AL-1456 (serv.man57) WinXP GDI Driver (v2.8A.006) with WHQL Drivers 772.21 KB
AL-1456 (serv.man58) WinNT4 GDI Driver (v2.8A.006) Drivers 802.74 KB
AL-1456 (serv.man59) WinMe GDI Driver (v2.8A.006) Drivers 858.18 KB
AL-1456 (serv.man60) Win9X GDI Driver (v2.8A.006) Drivers 889.6 KB
AL-1456 (serv.man18) Information of parts change To improve productivity, the L pulley has been changed Parts Guide 2 20.3 KB
AL-1456 (serv.man17) Strength increase of the turn over gate to prevent breakage. Parts Guide 3 58.91 KB
AL-1456 (serv.man16) Information of parts change. Parts Guide 4 30.17 KB
AL-1456 (serv.man19) Parts Guide Parts Guide 43 1.66 MB
AL-1456 (serv.man2) PARTS SUCH AS SIDE DOOR DETECT SWITCH UNIT CHANGE IN SHAPE FOR PRODUCTIVITY IMPROVEMENT Specification 3 162.03 KB
AL-1456 (serv.man3) Supply of the upper heat roller for preventing toner adhesion, as a service part Specification 2 40.18 KB
AL-1456 (serv.man4) Specification and general information Specification 5 185.8 KB
AL-1456 (serv.man45) ROM version upgrade..v3.11 Technical Bulletin 1 7.06 KB
AL-1456 (serv.man54) Improvement of SPF's image quality Technical Bulletin 2 1.36 MB
AL-1456 (serv.man53) Parts change information to SPF open close detector Technical Bulletin 2 393.78 KB
AL-1456 (serv.man52) Countermeasure against noise when operating the machine Technical Bulletin 2 549.45 KB
AL-1456 (serv.man51) Countermeasure against distortion at the rear edge Technical Bulletin 1 35.72 KB
AL-1456 (serv.man50) Change of parts Technical Bulletin 2 29.75 KB
AL-1456 (serv.man49) 1 Standardising the roller R (pickup roller) in the manual paper feeding section. 2 Changing to lead-free operation PWB and IF PWB. 3 Changing the high voltage PWB to comply with RoHS. Technical Bulletin 3 69.58 KB
AL-1456 (serv.man48) 1 Changing the 250 sheet cassette pawls F and R to comply with RoHS. 2 Changing the SPF hinges to comply with RoHS. Technical Bulletin 3 76.66 KB
AL-1456 (serv.man47) 1. Rear cover change, 2. Scanner motor change, 3. Shape change of the u-turn guide lower. Technical Bulletin 3 69.41 KB
AL-1456 (serv.man46) Information of parts change, 1 Transport belt change, 2 MFD sensor PWB change, 3 Transport clutch change, 4 Standardisation of separator pawl, 5 POD PPD1 sensor PWB change. Technical Bulletin 5 302.37 KB
AL-1456 (serv.man44) 1 Changing the SPF photo sensor to comply with RoHS. 2 Changing the solenoids to comply with RoHS. 3 Shape change of the 250 tray side plates F R. 4 Shape change of the open and shut exterior. Technical Bulletin 7 162.96 KB
AL-1456 (serv.man43) 1. Changing the MCU PWB, 2. Changing the shafts to comply with RoHS, 3. Changing the LSU unit to comply with RoHS, 4. Changing the rollers to comply with RoHS Technical Bulletin 9 403.02 KB
AL-1456 (serv.man42) 1. Standardising the MC harness unit, 2. Changing the CD-ROM, 3. Changing the screws to comply with RoHS. Technical Bulletin 7 682.51 KB
AL-1456 (serv.man41) Main motor change, 2 - AC power cord change. Technical Bulletin 3 70.81 KB
AL-1456 (serv.man40) Change of operation pwb to comply with RoHS. Technical Bulletin 4 97.84 KB
AL-1456 (serv.man39) Improvement of the scanner's dust-proof property. Technical Bulletin 6 558.43 KB
AL-1456 (serv.man38) Parts Changes. Technical Bulletin 2 29.35 KB
AL-1456 (serv.man37) PICK UP ROLLER ON MULTI PAPER FEED UNIT CHANGE IN SHAPE Technical Bulletin 2 26.52 KB
AL-1456 (serv.man36) Change in material of turn plate sheet. Technical Bulletin 3 57.76 KB
AL-1456 (serv.man35) MFP Driver for Win9x,Me,NT4.0,2K XP Driver / Update 10.01 MB
AL-1456 (serv.man34) Readme for Driver Installation Driver / Update 353 B
AL-1456 (serv.man33) ROM version upgrade..v3.11, to prevent L1-00 F5-02 Driver / Update 147.61 KB
AL-1456 AL1045 1255 1456 1555 Handy Guide Handy Guide 22 1.56 MB
AL-1456 (serv.man55) Media Warranty Safety Data Sheets Regulatory Data 9 3.42 MB

Random: