AL-1456 (serv.man25). Sect. 7 Maintenance - Sharp Copying Equipment User Guide / Operation Manual. Page 4

Read Sharp AL-1456 (serv.man25) User Guide / Operation Manual online

60
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean 
the charger using the following procedure.
1
Turn the power switch off. (p.12)
2
Ensure that the multi-bypass tray is open (AL-1555) and then 
open the side cover while pressing the side cover open button.
3
Take the charger cleaner out by holding the tab. Set the charger 
cleaner onto the right end of the transfer charger, gently slide 
the cleaner to the left end, and then remove it. Repeat this 
operation two or three times.
4
Return the charger cleaner 
to its original position. 
Close the side cover by 
pressing the round 
projections near the side 
cover open button.
5
Turn the power switch on. (p.12)
Slide the charger cleaner from the right end to the left end along 
the groove of the transfer charger. If the cleaner is stopped on 
the way, smudges on copies may occur.
Page of 4
Display

Download Sharp AL-1456 (serv.man25) User Guide / Operation Manual

Found More:

AL-1456 (serv.man25) Service Manuals

Preview DownloadPagesSize
AL-1456 (serv.man5) External views and internal structures Service Manual 7 336 KB
AL-1456 (serv.man6) Unpacking and installation Service Manual 9 609 KB
AL-1456 (serv.man7) Copy process Service Manual 4 114 KB
AL-1456 (serv.man8) Operational descriptions Service Manual 9 408 KB
AL-1456 (serv.man9) Disassembly and assembly part 1 Service Manual 16 1.79 MB
AL-1456 (serv.man10) Disassembly and assembly part 2 Service Manual 15 1.59 MB
AL-1456 (serv.man11) Adjustments Service Manual 7 205 KB
AL-1456 (serv.man12) Simulation and trouble codes Service Manual 15 135 KB
AL-1456 (serv.man13) User programs Service Manual 2 45 KB
AL-1456 (serv.man14) Electrical section Service Manual 13 293 KB
AL-1456 (serv.man15) Circuit diagram Service Manual 21 1.09 MB
AL-1456 (serv.man21) Back Cover User Guide / Operation Manual 2 53.62 KB
AL-1456 (serv.man29) Sect. 3 Loading Paper User Guide / Operation Manual 5 143.83 KB
AL-1456 (serv.man22) Media Warranty Safety Data Sheets User Guide / Operation Manual 9 3.42 MB
AL-1456 (serv.man23) Sect. 9 Appendix User Guide / Operation Manual 4 51.05 KB
AL-1456 (serv.man24) Sect. 8 Troubleshooting User Guide / Operation Manual 7 210.98 KB
AL-1456 (serv.man26) Sect. 6 Special Functions User Guide / Operation Manual 5 137.04 KB
AL-1456 (serv.man27) Sect. 5 Making Copies User Guide / Operation Manual 6 184.72 KB
AL-1456 (serv.man28) Sect. 4 Installing the Software User Guide / Operation Manual 27 505.09 KB
AL-1456 (serv.man20) Online Manual User Guide / Operation Manual 37 1.65 MB
AL-1456 (serv.man30) Sect. 2 Setting Up the Unit User Guide / Operation Manual 7 303.27 KB
AL-1456 (serv.man31) Sect. 1 Introduction User Guide / Operation Manual 3 199.18 KB
AL-1456 (serv.man32) Front Cover, Cautions Contents User Guide / Operation Manual 5 116.79 KB
AL-1456 (serv.man56) Win2K GDI Driver (v2.8A.006) with WHQL Drivers 772.21 KB
AL-1456 (serv.man57) WinXP GDI Driver (v2.8A.006) with WHQL Drivers 772.21 KB
AL-1456 (serv.man58) WinNT4 GDI Driver (v2.8A.006) Drivers 802.74 KB
AL-1456 (serv.man59) WinMe GDI Driver (v2.8A.006) Drivers 858.18 KB
AL-1456 (serv.man60) Win9X GDI Driver (v2.8A.006) Drivers 889.6 KB
AL-1456 (serv.man18) Information of parts change To improve productivity, the L pulley has been changed Parts Guide 2 20.3 KB
AL-1456 (serv.man17) Strength increase of the turn over gate to prevent breakage. Parts Guide 3 58.91 KB
AL-1456 (serv.man16) Information of parts change. Parts Guide 4 30.17 KB
AL-1456 (serv.man19) Parts Guide Parts Guide 43 1.66 MB
AL-1456 (serv.man2) PARTS SUCH AS SIDE DOOR DETECT SWITCH UNIT CHANGE IN SHAPE FOR PRODUCTIVITY IMPROVEMENT Specification 3 162.03 KB
AL-1456 (serv.man3) Supply of the upper heat roller for preventing toner adhesion, as a service part Specification 2 40.18 KB
AL-1456 (serv.man4) Specification and general information Specification 5 185.8 KB
AL-1456 (serv.man45) ROM version upgrade..v3.11 Technical Bulletin 1 7.06 KB
AL-1456 (serv.man54) Improvement of SPF's image quality Technical Bulletin 2 1.36 MB
AL-1456 (serv.man53) Parts change information to SPF open close detector Technical Bulletin 2 393.78 KB
AL-1456 (serv.man52) Countermeasure against noise when operating the machine Technical Bulletin 2 549.45 KB
AL-1456 (serv.man51) Countermeasure against distortion at the rear edge Technical Bulletin 1 35.72 KB
AL-1456 (serv.man50) Change of parts Technical Bulletin 2 29.75 KB
AL-1456 (serv.man49) 1 Standardising the roller R (pickup roller) in the manual paper feeding section. 2 Changing to lead-free operation PWB and IF PWB. 3 Changing the high voltage PWB to comply with RoHS. Technical Bulletin 3 69.58 KB
AL-1456 (serv.man48) 1 Changing the 250 sheet cassette pawls F and R to comply with RoHS. 2 Changing the SPF hinges to comply with RoHS. Technical Bulletin 3 76.66 KB
AL-1456 (serv.man47) 1. Rear cover change, 2. Scanner motor change, 3. Shape change of the u-turn guide lower. Technical Bulletin 3 69.41 KB
AL-1456 (serv.man46) Information of parts change, 1 Transport belt change, 2 MFD sensor PWB change, 3 Transport clutch change, 4 Standardisation of separator pawl, 5 POD PPD1 sensor PWB change. Technical Bulletin 5 302.37 KB
AL-1456 (serv.man44) 1 Changing the SPF photo sensor to comply with RoHS. 2 Changing the solenoids to comply with RoHS. 3 Shape change of the 250 tray side plates F R. 4 Shape change of the open and shut exterior. Technical Bulletin 7 162.96 KB
AL-1456 (serv.man43) 1. Changing the MCU PWB, 2. Changing the shafts to comply with RoHS, 3. Changing the LSU unit to comply with RoHS, 4. Changing the rollers to comply with RoHS Technical Bulletin 9 403.02 KB
AL-1456 (serv.man42) 1. Standardising the MC harness unit, 2. Changing the CD-ROM, 3. Changing the screws to comply with RoHS. Technical Bulletin 7 682.51 KB
AL-1456 (serv.man41) Main motor change, 2 - AC power cord change. Technical Bulletin 3 70.81 KB
AL-1456 (serv.man40) Change of operation pwb to comply with RoHS. Technical Bulletin 4 97.84 KB
AL-1456 (serv.man39) Improvement of the scanner's dust-proof property. Technical Bulletin 6 558.43 KB
AL-1456 (serv.man38) Parts Changes. Technical Bulletin 2 29.35 KB
AL-1456 (serv.man37) PICK UP ROLLER ON MULTI PAPER FEED UNIT CHANGE IN SHAPE Technical Bulletin 2 26.52 KB
AL-1456 (serv.man36) Change in material of turn plate sheet. Technical Bulletin 3 57.76 KB
AL-1456 (serv.man35) MFP Driver for Win9x,Me,NT4.0,2K XP Driver / Update 10.01 MB
AL-1456 (serv.man34) Readme for Driver Installation Driver / Update 353 B
AL-1456 (serv.man33) ROM version upgrade..v3.11, to prevent L1-00 F5-02 Driver / Update 147.61 KB
AL-1456 AL1045 1255 1456 1555 Handy Guide Handy Guide 22 1.56 MB
AL-1456 (serv.man55) Media Warranty Safety Data Sheets Regulatory Data 9 3.42 MB

Random: