AL-1456 (serv.man24). Sect. 8 Troubleshooting - Sharp Copying Equipment User Guide / Operation Manual. Page 5

Read Sharp AL-1456 (serv.man24) User Guide / Operation Manual online

65
8
2
Gently remove the misfed paper 
from under the fusing unit as 
shown in the illustration. If the 
paper cannot be removed, proceed 
to "C: Misfeed in the transport 
area".
3
Raise the fusing unit release lever and then close the side 
cover by pressing the round projections near the side cover 
open button. The misfeed (
) indicator will go out and the start 
(
) indicator will light up.
C: Misfeed in the transport area
1
Lower the fusing unit release lever.
See "B: Misfeed in the fusing area" (p.64).
2
Open the front cover.
To open the front cover, see "INSTALLING THE TD CARTRIDGE" (p.10).
3
Rotate the feeding roller in 
the direction of the arrow 
and gently remove the 
misfed paper from the exit 
area.
The fusing unit is hot. Do not 
touch the fusing unit when 
removing misfed paper. Doing 
so may cause a burn or other 
injury.
• Do not touch the surface of the drum (green portion) of the 
drum cartridge when removing the misfed paper. Doing so 
may cause smudges on copies.
• Do not remove the misfed paper from above the fusing unit. 
Unfixed toner on the paper may stain the paper transport 
area, resulting in smudges on copies.
Feeding roller
Page of 7
Display

Click on the first or last page to see other AL-1456 (serv.man24) service manuals if exist.