AL-1456 (serv.man10). Disassembly and assembly part 2 - Sharp Copying Equipment Service Manual (repair manual). Page 6

Read Sharp AL-1456 (serv.man10) Service Manual online

AL-1555 DISASSEMBLY AND ASSEMBLY 8 - 22
1) Open the right cabinet.
2) Remove three screws.
3) Remove one connector from MCU.
4) While tilting down the 2nd connection arm A, pull and remove the
paper feed unit toward you.
* When installing, securely insert two bosses C on the machine side
and two bosses D on the paper feed unit side. Be sure to secure the
ground wire B.
* Insert the 2nd page feed.
A. Paper sensor
1) Remove the pawl.
2) Remove the paper sensor.
3) Remove the harness.
B. Cassette detection switch
1) Remove the pawl.
2) Remove the cassette detection switch.
3) Remove the harness.
C. Paper feed solenoid
1) Remove the screw.
2) Remove the connector.
3) Remove the paper feed solenoid.
D. Transport roller
1) Remove two E-rings.
2) Remove the transport roller.
* Install so that the earth spring A is brought into contact over bearing
B.
1
2
4
B
A
3
2
D
D
C
2
3
1
1
2
3
1
2
3
4
2
1
3
A
B
Page of 15
Display

Click on the first or last page to see other AL-1456 (serv.man10) service manuals if exist.