AL-1217 (serv.man29). Troubleshooting the unit - Sharp Copying Equipment User Guide / Operation Manual. Page 3

Read Sharp AL-1217 (serv.man29) User Guide / Operation Manual online

61
8
MISFEED REMOVAL
When the misfeed (
) indicator blinks or 
 blinks in the display, the unit will 
stop because of a misfeed. If a misfeed occurs when using the SPF, a number may 
appear in the display after a minus sign. This indicates the number of the originals 
that must be returned to the original feeder tray after a misfeed. Return the required 
number of originals. Then this number will disappear when copying is resumed or the 
clear (
) key is pressed. When the SPF misfeeds an original sheet, the unit will 
stop and the SPF misfeed (
) indicator will blink, while the misfeed (
) indicator 
will remain off. For a misfeed of originals in the SPF, see "D: Misfeed in the SPF (AL-
1457)" (p.64).
1
Open the multi-bypass tray (AL-1457), and side cover, in that 
order.
To open the multi-bypass tray, see "The multi-bypass tray (AL-1457)" 
(p.17)
. To open the side cover, see "INSTALLING THE TD CARTRIDGE" 
(p.10).
2
Check the misfeed location. Remove the misfed paper 
following the instructions for each location in the illustration 
below. If the misfeed (
) indicator blinks, proceed to "A: 
Misfeed in the paper feed area" (p.62).
If paper is misfed here, proceed to "A:  
Misfeed in the paper feed area
". (p.62)
If paper is misfed here, proceed to "B:  
Misfeed in the fusing area
". (p.62)
If the misfed paper is seen from 
this side, proceed to "C: Misfeed 
in the transport area
". (p.63)
Page of 7
Display

Click on the first or last page to see other AL-1217 (serv.man29) service manuals if exist.