AL-1045 (serv.man8). Operational descriptions - Sharp Copying Equipment Service Manual (repair manual). Page 6

AL-1555 OPERATIONAL DESCRIPTIONS 7 - 6

1) Before paper feed operation, the manual paper feed solenoid

(MPFS) is turned OFF as shown in the figure below.

2) When the PRINT button is pressed, the manual paper feed

solenoid (MPFS) turns on to disengage the manual paper feed
latch.
A from the manual paper feed clutch sleeve A, rotating the manual
paper feed roller and the manual take-up roller. At the same time,
the manual paper feed stopper opens and the manual take-up
roller is pressed to the surface of the paper to start paper feeding.

3) When pawl C of the manual paper feed clutch sleeve is engaged

with the manual feed latch, the manual feed stopper falls and the
manual take-up roller rises. At that time, the manual paper feed
roller is rotating.

4) The lead edge of the transported paper is pressed on the resist

roller by the transport roller. Then the paper is stopped temporarily
to allow synchronization with the lead edge of the image on the
OPC drum.
From this point, the operation is the same as the paper feed
operation from the tray. (Refer to A-5 - 8.)

5) The solenoid turns off to close the gate and return to the initial

state.

OF

MPFS

F

C

A

ON

MPFS

A

C

ON

MPFS

A

C

OF

MPFS

F

A

C