Read Sharp AL-1045 (serv.man20) User Guide / Operation Manual online
40
4
Press the start (
) key.
Scanning will start and the scanned data will be transfered to the
application.
application.
Opening the scanner driver and scanning from your computer
Follow the steps below to open the scanner driver setup screen. As an example, this
instruction is given using Sharpdesk as an image capture application.
instruction is given using Sharpdesk as an image capture application.
•
If the following screen appears, select
Button Manager and click "OK". Button
Manager starts and the application
associated with Button Manager starts. If
you want only Button Manager to start in
this case, set up Button Manager for use in
Windows as explained in "Setting up the
Button Manager" (p.34).
Button Manager and click "OK". Button
Manager starts and the application
associated with Button Manager starts. If
you want only Button Manager to start in
this case, set up Button Manager for use in
Windows as explained in "Setting up the
Button Manager" (p.34).
•
If step 4 is performed with the "Show TWAIN setting screen when
scanning" checkbox selected in the Scan Parameter Setting
Dialog Box (p.36), the TWAIN settings screen (p.40) will
automatically appear. Check the settings, and then press the
start (
Dialog Box (p.36), the TWAIN settings screen (p.40) will
automatically appear. Check the settings, and then press the
start (
)key again or click the "Scan" button in the TWAIN
setting screen to start scanning. The scanned data will be
transferred to the application.
transferred to the application.
•
Scanning is not possible during a copy and print job.
•
The method for starting the scanner driver differs depending on the type
of application. Refer to the manual or the help file of your application.
•
When using the scanner driver to scan an original that has been placed
in the SPF/RSPF. If you perform a pre-scan (see the online manual or
the help file for the scanner driver), the original in the SPF/RSPF will be
output to the exit area after scanning. To scan the original after the pre-
scan, place the original in the SPF/RSPF once again.
SHARP AL-XXXX
Click on the first or last page to see other AL-1045 (serv.man20) service manuals if exist.