AL-1000, AL-1010 (serv.man9). AL1000 Operational Descriptions - Sharp Copying Equipment Service Manual (repair manual). Page 7

The image data sent from the MCU (image process circuit) is
sent to the LSU (laser unit), where it is converted into laser
beams.

The LSU unit is the writing section of the digital optical system.
The semiconductor laser is used as the light source, and im-
ages are formed on the OPC drum by the polygon mirror and
f

θ

 lens, etc.

The laser beams are passed through the collimator lens, the
cylindrical lens, the polygon mirror, the f

θ

 lens, and the mirror

to form images on the OPC drum in the main scanning direc-
tion. The laser emitting PWB is provided with the APC (auto
power control) in order to eliminate fluctuations in the laser
power. The BF PWB works for measurement of the laser writ-
ing start point.

No.

Component

Function

(1)

Semiconductor laser

Generates laser beams.

(2)

Collimator lens

Converges laser beams in
parallel.

(3)

Polygon mirror,
polygon motor

Reflects laser beams at a
constant rpm.

(4)

BD (Mirror, lens,
PWB)

Detects start timing of laser
scanning.

(5)

f

θ

 lens

Converges laser beams at a
spot on the drum.

Makes the laser scanning
speeds at both ends of the
drum same as each other.
(Refer to the figure below.)

Makes the laser scanning speeds at both ends of the drum
same as each other.

Effective scanning width: 216mm (max.)

Resolution:

600dpi

Beam diameter:

75um in the main scanning
direction, 80um in the sub
scanning direction

Image surface power:

0.20 

±

0.03mW (Laser

wavelength 780 – 795nm)

Polygon motor section:

Brushless motor 20.787rpm
No. of mirror surfaces: 6 surfaces

(1)

(2)

(3)

(4)

(5)

 : Laser beam

path for BF PWB

a 

≠ 

b 

≠ 

c

a

b

c

d = e = f

d

e

f

 

f

θ 

LENS

AL-1000/1010

7-3