Read Sharp AL-1000 / AL-1010 (serv.man10) Service Manual online
(7) Remove the plate spring on the right and remove the
heater lamp.
(8) Remove the spring and remove the separation pawls (3
pcs.).
(9) Remove the E-ring and remove the reverse gate.
(10) Remove the pressure release levers on the right and the
left sides.
(11) Remove the pressure roller, the pressure bearing, and the
pring.
Note: Apply grease to the sections specified with
✽
.
Heat roller disassembly
(Continued from procedure (4).)
(Continued from procedure (4).)
(5) Remove screws, remove the fusing cover, and open the
heat roller section.
1)
2)
Hearter lamp
3)
1)
2)
2)
1)
3)
1)
1)
1)
2)
2)
1)
3)
3)
Pressure roller
✽
✽
1)
2)
2)
3)
3)
AL-1000/1010
8-6
Click on the first or last page to see other AL-1000 / AL-1010 (serv.man10) service manuals if exist.