Read Sharp PN-ZB01 Service Manual online
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-V602 OUTLINE OF THE PRODUCT
1 – 5
1 - 5. COMPATIBLE SIGNAL TIMING (AV)
*
1
Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed.
*
2
Available when the PN-ZB02 (optional) is attached.
1 - 6. POWER MANAGEMENT
This monitor conforms to VESA DPMS and DVI DMPM. Both your video
card and computer must support the same standard in order for the
monitor’s power management function to work.
DPMS: DISPLAY POWER MANAGEMENT SIGNALING
DMPM: DIGITAL MONITOR POWER MANAGEMENT
*
1
When PN-ZR01 (optional), or PN-ZB02 (optional) is not
connected.
*
2
When “AUTO INPUT CHANGE” is set to “OFF”.
1 - 7. POWER LIMITED
Set to ensure maximum power consumption.
3Refer to page 1 - 1 "1 - 1. OUTLINE".
1 - 8. DDC (PLUG AND PLAY)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and com-
puters. Information about resolution and other parameters is exchanged
between the two. This function can be used if the computer supports
between the two. This function can be used if the computer supports
DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication
method used. This monitor supports DDC2B.
method used. This monitor supports DDC2B.
1 - 9.
SUPPLIED ACCESSORIES (PN-V602)
Screen resolution
Frequency
DVI-D
*2
HDMI
Component
*2
1920 x 1080p
*1
24Hz
---
Yes
---
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
1920 x 1080i
*1
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
1280 x 720p
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
720 x 576p
50Hz
Yes
Yes
Yes
720 x 480p
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
640 x 480p (VGA)
59.94Hz
Yes
Yes
---
60Hz
Yes
Yes
---
720 (1440) x 576
50Hz
---
Yes
Yes
720 (1440) x 480i
59.94Hz
---
Yes
Yes
60Hz
---
Yes
Yes
DPMS
Screen
Power
consumption
*
Hsync
Vsync
ON STATE
Display
510W
Yes
Yes
STANDBY
No
display
1.0W
*2
No
Yes
SUSPEND
Yes
No
OFF STATE
No
No
DMPM
Screen
Power
consumption
*
Monitor ON
Display
510W
Active OFF
No display
1.0W
*2
MODE
Power consumption
MODE2
195 W
MODE1
310 W
OFF
510 W
Power cord: 1
CD-ROM (Utility Disk for Windows): 1
Setup manual: 1
Protection cover: 4
Handle screw (short): 4
Handle screw (short): 4
Bezel sheet (long/short): 2 each
Bezel sheet attachment instructions: 1
Cable clamp: 2
* Sharp Corporation holds authorship rights to the Utility Disk
program. Do not reproduce it without permission.
Click on the first or last page to see other PN-ZB01 service manuals if exist.