Read Sharp PN-ZB01 (serv.man2) Service Manual online
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-E601 OUTLINE OF THE PRODUCT
1 – 6
1 - 4. COMPATIBLE SIGNAL TIMING (AV)
*
1
Available when the PN-ZB01 (optional) is attached.
1 - 5. POWER MANAGEMENT
This monitor conforms to VESA DPMS and DVI DMPM. Both your video
card and computer must support the same standard in order for the
monitor’s power management function to work.
DPMS: DISPLAY POWER MANAGEMENT SIGNALING
DMPM: DIGITAL MONITOR POWER MANAGEMENT
*
The power consumption is the value when the display is not
equipped with the PN-ZB01 (optional).
equipped with the PN-ZB01 (optional).
*
1
When “AUTO INPUT CHANGE” is set to “OFF”.
1 - 6. DDC (PLUG AND PLAY)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and com-
puters. Information about resolution and other parameters is exchanged
between the two. This function can be used if the computer supports
between the two. This function can be used if the computer supports
DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication
method used. This monitor supports DDC2B.
method used. This monitor supports DDC2B.
1 - 7. SUPPLIED ACCESSORIES
Screen resolution
Frequency
DVI-D
*1
HDMI
Component
*1
1920 x 1080p
24Hz
---
Yes
---
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
1920 x 1080i
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
1280 x 720p
50Hz
Yes
Yes
Yes
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
720 x 576p
50Hz
Yes
Yes
Yes
720 x 480p
59.94Hz
Yes
Yes
Yes
60Hz
Yes
Yes
Yes
640 x 480p (VGA)
59.94Hz
Yes
Yes
---
60Hz
Yes
Yes
---
720 (1440) x 576
50Hz
---
Yes
Yes
720 (1440) x 480i
59.94Hz
---
Yes
Yes
60Hz
---
Yes
Yes
DPMS
Screen
Power
consumption
*
Hsync
Vsync
ON STATE
Display
PN-E601: 400W
PN-E521: 265W
PN-E521: 265W
PN-E471: 260W
PN-E421: 225W
Yes
Yes
STANDBY
No
display
2.0W
*1
No
Yes
SUSPEND
Yes
No
OFF STATE
No
No
DMPM
Screen
Power
consumption
*
Monitor ON
Display
PN-E601: 400W
PN-E521: 265W
PN-E471: 260W
PN-E471: 260W
PN-E421: 225W
Active OFF
No display
2.0W
*1
* Place a blank sticker onto the SHARP logo to cover the logo.
Remote control unit: 1
Power cord: 1
R-6 battery ("AA" size): 2
CD-ROM (Utility Disk for Windows): 1
Operation manual: 1
Stand hole protection cover: 2
Vertical logo sticker: 2
Blank sticker: 1
Cable clamp: 2
* Sharp Corporation holds authorship rights to the Utility Disk
program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the
disposal instructions for your area.
disposal instructions for your area.
PN-E601/E521
PN-E471/E421
Click on the first or last page to see other PN-ZB01 (serv.man2) service manuals if exist.